Invacare M51P Owners Manual - Page 24

SECTION 4-SAFETY INSPECTION/TROUBLESHOOTING Inspect/Adjust Weekly ❑ Seat is secured to wheelchair frame. ❑ Seat and/or back upholstery have no rips and do not sag. Replace if necessary. ❑ Seat release latch is not worn and is functional. Replace if necessary. ❑ Inspect tires for flat spots and wear. ❑ Ensure arm pivot points are not worn and/or loose. Replace if necessary. ❑ Ensure casters are free of debris. Inspect/Adjust Monthly ❑ Ensure wheel mounting nuts are secure on drive wheels. ❑ Ensure no excessive side movement or binding occurs when drive wheels are lifted and spun when disengaged (freewheeling). ❑ Inspect caster assembly has proper tension when caster is spun. Caster should come to a gradual stop. ❑ Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop. ❑ Ensure all caster/wheel/fork/headtube fasteners are secure. ❑ Inspect for any loose hardware on the wheelchair. ❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged. Replace if necessary. ❑ Ensure casters are free of debris. Inspect/Adjust Periodically ❑ Ensure wheelchair rolls straight (no excessive drag or pull to one side). ❑ Ensure arms are secure but easy to release and adjustment levers engage properly. ❑ Ensure adjustable height arms operate and lock securely. ❑ Ensure arm pivot points are not worn and/or loose. Replace if necessary. ❑ Ensure armrest pads sit flush against arm. ❑ Ensure seat and/or back upholstery have no rips and do not sag. Replace if necessary. ❑ Ensure seat release latch is not worn. Replace if necessary. ❑ Clean upholstery and armrests. ❑ Inspect charger AC power cord for damage. Replace if necessary. ❑ Ensure casters are free of debris. ❑ Inspect electrical components for signs of corrosion. Replace if corroded or damaged. ❑ Check that all labels are present and legible. Replace if necessary. Pronto® M51™and M61™with SureStep® 24 Part No 1125085