Invacare V20RLR Owners Manual - Page 29
Front Rigging
View all Invacare V20RLR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
6 Front Rigging 6 FRONT RIGGING ƽ WARNING After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise injury or damage may occur. 6.1 Installing/Removing Front Riggings Installing 1. Turn the front rigging to the side (open footplate is perpendicular to wheelchair). 2. Install the front rigging hinge plates onto the hinge pins on the wheelchair frame. 3. Push the front rigging toward the inside of the wheelchair until it locks into place. Release Lever The footplate will be on the inside of the wheelchair when locked in place. 4. Repeat STEPS 1-3 for the opposite side of the wheelchair. 5. To release the front rigging, push the footrest release lever inward, rotate footrest outward. Swingaway Footrest Removing Hinge Pins 1. Push the release lever inward and rotate the front rigging outward. 2. Lift up on front rigging and remove from the wheelchair. 3. Repeat STEPS 1-2 for the opposite side of the wheelchair. Hinge Plates Footplate FIGURE 1 Installing/Removing Front Riggings Part No. 1148116 29 Invacare® Veranda™Wheelchair