JVC 6032VSL Instruction Manual - Page 17

Basic Operations/Basic Settings Basic Settings Basic Settings Using MULTI JOG Dial After connecting and placing speakers, you need to make basic settings for the following items according to your listening conditions. • Speaker information (see the next column and page 16) • Digital input terminal sources (see page 16) • RX-6030VBK and RX-6032VSL only: Video input terminal type (see page 16) 7 Operating buttons DIMMER INPUT DIGITAL INPUT ANALOG INPUT ATT SETTING MULTI JOG ADJUST RY SET EXIT SETTING MULTI JOG ADJUST SET EXIT Buttons SETTING MULTI JOG SET EXIT To do Enter the receiver into the basic setting mode. • Select an item to adjust after pressing SETTING. • Adjust the selected item after pressing SET. Determine the item to adjust. Exit from the basic setting mode or return to the previous step. 7 Operating procedure Ex. Setting the subwoofer information Before you start, remember... There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again. 1 Press SETTING. The last selected item appears on the display. 2 Turn MULTI JOG dial to select an item you want to adjust. SUBWOOFER O FRNT SPEAKERS O CNTR SPEAKER O SURR SPEAKERS O DISTANCE UNIT O FRNT DISTANCE O CNTR DISTANCE O SURR DISTANCE O CROSSOVER O LFE ATTENUATE O D_COMPRESSION O DIGITAL IN O VIDEO IN DVD* O VIDEO IN VCR* O (back to the beginnning) * RX-6030VBK and RX-6032VSL only. 3 Press SET. The current setting of the selected item appears on the display. 4 Turn MULTI JOG dial to adjust the selected item. Select "SUBWOOFER YES" if a subwoofer is connected. Ex.: When "SUBWOOFER YES" is selected. 5 Press EXIT. To adjust other items, repeat steps 2 to 5. To finish the setting, go to step 6. 6 Press EXIT again. The receiver exits from the basic setting mode. Setting the Speaker Information "NO" for the subwoofer, "LARGE" for the front speakers, and "SMALL" for the center and surround speakers are initial settings. To get best possible sound, change the subwoofer and speaker settings to fit your listening conditions. 7 Subwoofer information-SUBWOOFER Register whether you have connected a subwoofer or not. YES NO Select this when you have connected a subwoofer. You can adjust the subwoofer output level (see page 21). Select this when you have not connected or have disconnected a subwoofer. 7 Speaker size-FRNT (Front) SPEAKERS, CNTR (Center) SPEAKER, SURR (Surround) SPEAKERS Register the sizes of all the connected speakers. • When you change your speakers, register the information about the speakers again. LARGE SMALL NONE Select this when the size of the cone speaker unit built in your speaker is greater than 12 cm (4 3/4 inches). Select this when the size of the cone speaker unit built in your speaker is smaller than 12 cm (4 3/4 inches). Select this when you have not connected a speaker. (Not selectable for the front speakers) Notes: • If you have selected "NO" for the subwoofer setting, you can only select "LARGE" for the front speaker setting. • If you have selected "SMALL" for the front speaker setting, you cannot select "LARGE" for the center and surround speaker settings. Ex.: When "SUBWOOFER" is selected. 15