JVC 6032VSL Instruction Manual - Page 73

English Using DSP Modes Speaker layouts required for the DSP modes are as follows: • 5 channels (Front, center, and surround speakers are connected.) • 4 channels (Front and surround speakers are connected.) 7 Operating procedure 1 Start playing 2 channel software-either analog or Linear PCM-and select the source. 2 Press DSP. The last selected DSP mode will be activated and the DSP indicator lights up on the display. • Each time you press the button, the DSP mode changes as follows: LIVE CLUB DANCE CLUB HALL ALL CH STEREO (All Channel Stereo) PAVILION Note: For the available DSP modes according to input signals, see "Available Surround/DSP modes for each input signal" on page 25. To adjust the speaker output level and the effect level for DAP mode, see pages 19 to 21. The adjustment is memorized for each source (except for the effect level). 7 Adjustable items and selected Surround/DSP mode • For adjustment operation, see pages 19 to 21. Selected Surround/ DSP mode SURROUND OFF (stereo) DOLBY DIGITAL, DTS SURROUND, PL II MOVIE PL II MUSIC LIVE CLUB, DANCE CLUB, HALL, PAVILION ALL CH STEREO (All Channel Stereo) Adjustable items FRONT L LEVEL FRONT R LEVEL SUBWFR LEVEL FRONT L LEVEL FRONT R LEVEL CENTER LEVEL SURR L LEVEL SURR R LEVEL SUBWFR LEVEL FRONT L LEVEL FRONT R LEVEL CENTER LEVEL SURR L LEVEL SURR R LEVEL SUBWFR LEVEL PANORAMA CTRL FRONT L LEVEL FRONT R LEVEL SURR L LEVEL SURR R LEVEL SUBWFR LEVEL EFFECT FRONT L LEVEL FRONT R LEVEL CENTER LEVEL SURR L LEVEL SURR R LEVEL SUBWFR LEVEL Adjustable range -10 to +10 -10 to +10 -10 to +10 ON " OFF -10 to +10 1 to 5 -10 to +10 Notes: • Regardless of the selected Surround/DSP mode, - You cannot adjust the center speaker output level when the center speaker size is set to "NONE" (see page 15). - You cannot adjust the surround speaker output levels when the surround speaker size is set to "NONE" (see page 15). • You cannot adjust the subwoofer output level when "SUBWOOFER NO" is selected for the subwoofer setting (see page 15). To turn off DSP mode, press SURROUND/DSP OFF. Signal and speaker indicators on the display Signal indicators Speaker indicators The following signal indicators light up-: L: • When digital input is selected: Lights up when the left channel signal comes in. • When analog input is selected: Always lights up. R: • When digital input is selected: Lights up when the right channel signal comes in. • When analog input is selected: Always lights up. C: When the center channel signal comes in. LS: When the left surround channel signal comes in. RS: When the right surround channel signal comes in. S: When the monaural surround channel signal comes in. LFE: When the LFE channel signal comes in. The speaker indicators light up when the corresponding speaker is connected and activated. Notes: • When "SUBWOOFER YES" is selected for the subwoofer setting (see page 15) and the subwoofer output is turned on (see page 18), S.WFR lights up. • When you select "DVD MULTI" (RX-6030VBK and RX-6032VSL only), all the signal indicators except "S" light up. 27