JVC 6032VSL Instruction Manual - Page 33

AV COMPU LINK Remote Control System Notes: • When connecting only the VCR or DVD player to this receiver, connect it directly to the receiver using cables with the monaural mini-plugs. • Make sure that the remote control code of the VCR connected to the VCR jacks is set to code "A." • Refer also to the manuals supplied with your video components. 7 Connecting procedure 1 If you have already plugged your VCR, DVD player, TV and this receiver into the AC outlets, unplug their AC power cords first. 2 Connect your VCR, DVD player, TV and this receiver as illustrated on page 30, using the cables with monaural mini-plugs (not supplied). 3 Connect the audio/video input/output jacks on VCR, DVD player, TV and this receiver (see pages 8 and 9). 4 Plug the AC power cords of the components into the AC outlets. 5 When turning on the TV for the first time after the AV COMPU LINK connection, turn the TV volume to the minimum using the TV volume control on the TV. 6 Turn on the other connected components first, then turn on this receiver. • When turning on the VCR, use the remote control supplied with this receiver (press STANDBY/ON VCR). The AV COMPU LINK remote control system allows you to use the five basic functions listed below. Remote Control of the TV, DVD player, and VCR using this Remote Control See page 34 for details. • Aim the remote control directly at the remote sensor on each target component. One-Touch Video Play Simply by inserting a video cassette without its safety tab into the VCR, you can start video playback without setting other switches manually. The receiver automatically turns on and changes the source to "VCR." The TV automatically turns on and changes the input mode to the position so that you can view the playback. When you insert a video cassette with its safety tab, press the play (3) button on the VCR or on the remote control to get the same result. One-Touch DVD Play Simply by starting playback on the DVD player, you can view the DVD playback without setting other switches manually. • When the DVD player is connected through the analog input jacks on this receiver (and analog input is selected), the receiver automatically turns on and changes the source to "DVD" (or "DVD MULTI"-RX-6030VBK and RX-6032VSL only). • When the DVD player is connected through the digital input terminal on this receiver (and digital input is selected), the receiver automatically turns on and changes the source to "DVD DIGITAL." • The TV automatically turns on and changes the input mode to the appropriate position so that you can view the playback. Automatic Selection of the TV Input Mode • When you select "TV SOUND" as the source to play on the receiver, the TV automatically changes the input mode to the TV tuner so that you can watch TV. • When you select "DVD" or "VCR" (or "DVD MULTI"- RX-6030VBK and RX-6032VSL only) as the source to play on the receiver, the TV automatically changes the input mode to the appropriate position so that you can view the playback. Note for RX-6030VBK and RX-6032VSL: When connecting a TV with the AV COMPU LINK EX terminal to this receiver, you cannot use a component video cable. Connect the TV using an S-video or composite video cable. Automatic Power On/Off The TV, VCR, and DVD player turn on and off along with the receiver. When you turn on the receiver; • If the previously selected source is "VCR," the TV and VCR will turn on automatically. • If the previously selected source is "TV SOUND," only the TV will turn on automatically. • If the previously selected source is "DVD" (or "DVD MULTI"- RX-6030VBK and RX-6032VSL only), the TV and DVD player will turn on automatically. When you turn off the receiver, the TV, VCR, and DVD player will turn off. Note: If you turn off the receiver while recording on the VCR, the VCR will not turn off, but continue recording. 31