JVC BM-H1900SU BM-H1900SU monitor instruction manual (243KB) - Page 11
ON-SCREEN MENU CONTROLS continued
View all JVC BM-H1900SU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ON-SCREEN MENU CONTROLS (continued) PEAKING FREQ./PEAKING LEVEL (picture quality improvement) Corrects the luminance signal to improve picture quality by changing peak frequency and/or peak level depending on the video signal input to the monitor. Use PEAKING FREQ. to set correction frequency. Use PEAKING LEVEL to set correction level. Setting (ferquency) 2.6 MHz 5.0 MHz Function For composite video signal or Y/C signal. For component video signal. NOTE q When analog RGB signals are input to the monitor, the indications do not appear and the functions cannot be operated. Setting (level) 0 dB to +9 dBs Function Set a higher level for correction to a higher degree. AFC (switching of time constant for the AFC) Use to set the time constant for the AFC (auto fine-frequency control) to correct skew distortion of video signals input via a videotape recorder or other video equipment. Setting NORMAL FAST SLOW Function Normal-speed correction. Faster correction. Slower correction. COLOR TEMP. (color temperature switching) Use to set the color temperature of white balance. 9300 6500 Setting To 9300K. To 6500K. Function NTSC SETUP (NTSC set-up level) Use to set up the luminance signal level to match the configuration of the video signal input to the monitor. Setting 0 7.5 Function For video signal with 0% luminance signal. For video signal with 7.5% luminance signal. COMPO. LEVEL (chrominance level setting) Use to set the chrominance level of a component video signal. Setting SMPTE BETA00 BETA75 Function For component video signal input via an M videotape recorder. For component video signal input (set-up level:0%) via a BETACAM videotape recorder. For component video signal input (set-up level:7.5%) via a BETACAM videotape recorder. NOTE q By changing the default setting of white balance adjustment under the SET-UP MENU display (see page 15 for adjustment), the T indication is added to the right of the setting to indicate that the factory-preset setting was changed. qMENU r ASPECT RAT I O :4-3 F I L TER SE LEC T :COMB PEAK I NG FREQ. :2.6MHZ PEAK I NG LEVEL:0dB AFC :NORMAL COLOR TEMP. :6500 NTSC SETUP :7.5 COMPO. L E VE L :BETA75 qMEMORY MODE r RGB / COMPO(SDI) :RGB ENTER : NOTE q The item and setting are indicated on screen and the function can be operated only when a video signal of the NTSC system is input to the monitor. NOTE q The item and setting are indicated on screen and the function can be operated only when a component video signal is input to the monitor. 11