JVC BM-H1900SU BM-H1900SU monitor instruction manual (243KB) - Page 5

TERMINALS AND FEATURES (REAR) (Rear) 4 5 23 IN VIDEO A OPEN 75 ¶ VIDEO B OPEN 75 ¶ OUT SYNC OPEN 75 ¶ 7 6 89 w IN Y / C OUT OPEN 75 ¶ RGB/COMPO(SDI) G / Y OPEN 75 ¶ AUDIO IN OUT B / B-Y OPEN 75 ¶ R / R-Y OPEN 75 ¶ FOCUS TALLY/ REMOTE e r p q ty 1 1 Power socket Connect to an AC outlet (120 V AC, 50/60 Hz) using the provided power cord. 2 VIDEO A terminals Composite video signal input terminal and bridgeconnected output terminal. 3 VIDEO A termination switch Set to OPEN for bridged connection; set to 75 for input signal only. 4 VIDEO B terminals Composite video signal input terminal and bridgeconnected output terminal. 5 VIDEO B termination switch Functions as for 3. 6 SYNC terminals External sync signal input terminal and bridge-connected output terminal. Input an external composite sync signal to these terminals when inputting a video signal without a sync signal, or when synchronizing the monitor with an external sync signal. 7 SYNC termination switch Functions as for 3. 8 Y/C terminals Input terminal of Y/C signals and bridge-connected output terminal. 9 Y/C termination switch Functions as for 3. p RGB/COMPO(SDI) terminals Input terminal of analog RGB signals or Y/B-Y/R-Y signals and bridge-connected output terminal. For analog RGB signals, also accepts a G signal including a sync signal. q RGB/COMPO(SDI) termination switch Functions as for 3. w AUDIO A terminals Audio signal input terminal and bridge-connected output terminal. Linked with the VIDEO A terminals so that AUDIO A terminals and VIDEO A terminals are selected simultaneously. e AUDIO B terminals Audio signal input terminal and bridge-connected output terminal. Linked with the VIDEO B or Y/C terminals so that AUDIO B terminals and VIDEO B or Y/C terminals are selected simultaneously. r AUDIO RGB/COMPO(SDI) terminals Audio signal input terminal and bridge-connected output terminal. Linked with the RGB/COMPO(SDI) terminals so that AUDIO RGB/COMPO(SDI) terminals and RGB/ COMPO(SDI) terminals are selected simultaneously. t FOCUS control Adjustment hole exclusively for use by service personnel. Make sure to consult qualified service personnel for adjustment. y TALLY/REMOTE terminal External input terminal of a tally signal to make the tally lamp glow, or of a remote-control signal to switch input or picture control. 5