JVC CSDA1 Instructions - Page 13
CONNECTIONS, When using speaker input terminal - cs da1
UPC - 046838031090
View all JVC CSDA1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
CONNECTIONS When using speaker input terminal Set the LPF switch to either A110 HzB or A85 HzB according to your preference. When no remote output is equipped for your car receiver, connect to the ACC power. ACC power cord ENGLISH CS-DA1 Crimp connector Power cord Blue/White Remote input TO REMOTE OUT Remote output Left speaker TO SPEAKER INPUT Speaker input White/Black Speaker input cord White 1 Gray 2 White Left speaker JVC Car receiver, etc. Right speaker Connect to stereo output with maximum power 60 W or lower (per channel). Gray Gray/Black Right speaker POWER LEAD Fuse 15A Yellow ⅐ Connect only to the plus + side of the battery. GROUND Black ⅐ Connect to the metal part (such as the chassis) of the car. Remote controller 1 : TO L CHANNEL SPEAKER OUTPUT 2 : TO R CHANNEL SPEAKER OUTPUT NOTES: • The volume of this unit is set to the maximum when the remote controller is not connected. • If your receiver is equipped with the DSP (Digital Signal Processor), connect this unit to the front speaker output of the receiver. 9