JVC CSDA1 Instructions - Page 16
[Connecting to 5.1ch subwoofer output], subwoofer output level at the 5.1ch decoder.
UPC - 046838031090
View all JVC CSDA1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
ENGLISH [Connecting to 5.1ch subwoofer output] Set the LPF switch to AOFFB. When no remote output is equipped for your car receiver, connect to the ACC power. ACC power cord L-shaped pin plug relay cord CS-DA1 Crimp connector Power cord Blue/White Remote input TO REMOTE OUT Remote output TO SPEAKER INPUT Speaker input This is not used when LINE IN terminal is used. JVC Car receiver, etc. Pin cord (not supplied) 5.1ch subwoofer output POWER LEAD Fuse 15A Yellow ⅐ Connect only to the plus + side of the battery. GROUND Black ⅐ Connect to the metal part (such as the chassis) of the car. Remote controller NOTES: • Set the subwoofer output level of the car stereo to the maximum and use the remote control to adjust the volume of the unit. (However, when the sound of the unit becomes distorted, lower the subwoofer output level at the 5.1ch decoder.) • When the subwoofer output is 1 channel, connect to Lch. Insulate plugs that are not used with vinyl tapes. 12