JVC DLA-NZ8 Operation Manual - Page 68
HDMI EDID Setting, Adjust/Set, HDR10
View all JVC DLA-NZ8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
HDMI EDID Setting Mode For changing the EDID mode of the "HDMI 1/HDMI 2" terminal. Set to "A" under normal condition. The images may not be displayed on some old devices. In this case, try "B" or "C". Setting Description Configures the EDID mode to "A" A Supports up to 8K60p and 4K120p. Configures the EDID mode to "B" B Supports up to 4K60p. Configures the EDID mode to "C" C Supports up to 1080p60. * EDID (Extended Display Identification Data) refers to the information, such as supported resolutions, exchanged between devices. DSC For configuring whether DSC transmission is allowed. Set to "On" under normal condition. Setting Description On Allows compressed video transmission Off Prohibits compressed video transmission * DSC (Display Stream Compression) is one of the lossy video signal compression transmission technologies. HDR10+ For configuring whether HDR10+ transmission is allowed. To enjoy HDR10+ content, configure to "On". Setting On Off Allows HDR10+ transmission Prohibits HDR10+ transmission Description MEMO 0 The "HDMI EDID Setting" settings are saved separately for each input terminal. The name of the currently selected input terminal is shown at the top right corner of the "HDMI EDID Setting" menu. 0 To switch to configure the settings for a different input terminal, press the "INPUT" button on the remote control unit, or press the ↑↓ key on the projector unit after turning off the menu screen. Adjust/Set 68