JVC DLA-RS1X DLA-RS1U Owner's Manual (50 pages) - Page 25

Getting Started Preparation Basic Operation DLA-RS1_EN.book Page 25 Wednesday, January 24, 2007 9:23 AM ENGLISH Setting Menu Item values shown in are factory settings. z Items that can be configured differ according to the input signals. Image>Image Adjust A Contrast Adjusts the contrast of the projected image. (Black) b30 f 30 (White) B Brightness Adjusts the brightness of the projected image. (Darken) b30 f 30 (Brighten) C Color Adjusts the color density of the projected image. (Lighten) b30 f 30 (Darken) D Tint Adjusts the hue of the projected image. (Red) b30 f 30 (Green) E Sharpness Adjusts the outline of the projected image. (Soft) b30 f 30 (Sharp) F DNR Adjusts the strength of noise removal of the projected image. (Weak) 0 f 30 (Strong) z AContrastB, ABrightnessB, AColorB and ASharpnessB can also be configured from the remote control. (pP12) z ATintB can only be adjusted when NTSC signals are input to the video or S-video input terminal. Image>Color Temp. G Color Temp. Sets the color temperature of the projected image. Low Select this to give a reddish tinge to the image. Middle Select this to have a balanced image. High Select this to give a bluish tinge to the image. Red (Less red) b255 f 0 (More red) User10 Green (Less green) b255 f 0 (More green) Blue (Less blue) b255 f 0 (More blue) Red (Less red) b255 f 0 (More red) User20 Green (Less green) b255 f 0 (More green) Blue (Less blue) b255 f 0 (More blue) * The red, green and blue colors can be adjusted and registered respectively. z This setting can also be configured from the remote control. (pP12) Settings Troubleshooting Others 25