JVC DLA-RS1X DLA-RS1U Owner's Manual (50 pages) - Page 30

DLA-RS1_EN.book Page 30 Wednesday, January 24, 2007 9:23 AM 4 Settings Setting Menu (Continued) Install.>High Altitude Mode a High Altitude Mode Select this when using the projector in a location of low atmospheric pressure (higher than 900 meters above sea level). On Activate. Off Do not activate. Func.>Back Color b Back Color Configures the screen color displayed when there is no input signal. Blue Sets screen color to ABlueB. Black Sets screen color to ABlackB. Func.>Sleep Timer c Sleep Timer Sets the lapse time before automatically switching to the standby mode when there is no input signal. 15 Switch to standby mode after 15 minutes. 30 Switch to standby mode after 30 minutes. 60 Switch to standby mode after 60 minutes. Off Do not switch to standby mode. Func.>D-ILA Logo d D-ILA Logo Sets whether to display AD-ILA LogoB during startup. On Displays for 5 seconds. Off Do not display. Func.>Lamp Power e Lamp Power Configures the output of the light-source lamp. Normal For normal circumstances, select this setting. (170 W) High Select this when it is difficult to see the image in a bright room. (200 W) z Changing the lamp power will not change the lamp time (lamp life). z The setting cannot be changed within approximately 90 seconds after this unit has been turned on. z Settings cannot be changed within approximately 60 seconds after they are made. Func.>Test Pattern f Test Pattern Displays 6 types of test patterns. z This can also be displayed from the remote control. (pP12) 30