JVC DLA-RS1X DLA-RS1U Owner's Manual (50 pages) - Page 34

DLA-RS1_EN.book Page 34 Wednesday, January 24, 2007 9:23 AM 5 Troubleshooting Troubleshooting Before sending the unit to your authorized dealer for repair, check the following points. The following situations are not malfunctions. „ You do not need to worry under the following situations if there is no abnormality on the screen. z Part of the top surface or front of the unit is hot. z A creaking sound is heard from the unit. z An operating sound is heard from the internal of the unit. „ Perform the following operations when the unit is unable to operate normally due to external static or noises. A When the unit is in standby mode, pull out the power plug, then insert again. B Press the power button on the unit to turn on the power again. „ A sound may be heard when the lamp is off but there is no danger. „ D-ILA device is manufactured using high-precision technology but there may be some missing pixels or pixels that remain permanently lit up. Power is not supplied Is the power cord disconnected? Is the lamp cover properly shut? Is the lamp in Cool Down mode? Insert the power cord (plug) firmly. Remove the power plug when the unit is in standby mode and close the lamp cover properly. After that, insert the plug again. After the Cool Down mode is complete, turn on the power again. pP20 pP39 pP21 Projected image is dark Is the lamp near exhaustion? Check the lamp time on the information menu. Prepare a new lamp unit or replace as soon as possible when the lamp is near pP38f40 exhaustion. The unit works when power is turned on but stops abruptly after a few minutes Are the air inlets and exhaust vent blocked? Remove the power plug when the unit is in standby mode and remove any blocking object. After that, insert the plug again. Is the filter dirty? Clean the filter. pP2, 10 pP41 Video image does not appear Is the lens cap removed? Is the correct external input selected? Is the AV device properly connected? Is the power of the AV device turned on? Are the correct signals being output from the AV device? Is the setting of the input terminal correct? Is the video image temporarily hidden? Remove the lens cap. Select the correct external input. Connect the AV device properly. Turn on the power of the AV device and play the video. Set the AV device properly. Set ACOMPB and AHDMIB in the setting menu according to the input signal. Press the [HIDE] button to display the video image again. pP20 pP20 pP14f16 pP20 pP14f16 pP27 - P pP28 - Q pP21 Color does not appear or looks strange Is the image correctly adjusted? Adjust AColorB and ATintB in the setting menu. pP25 - C D 34