JVC DLA-S15U DLA-S15U User instruction manual (2.1MB) - Page 47
Changing Setting the Source
View all JVC DLA-S15U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Operating the Main Menu (Cont.) Changing (Setting) the Source s Remote control unit Normally, use the source setting in AUTO. If use in AUTO is unstable such as color not appearing, the screen being disturbed or the screen being intermitted, set to the dedicated source (forced mode) in accordance with the input signal. OPERATE COMPUTER VIDEO MENU/ENTER button VOL. PAGE BACK PRESET QUICK ALIGN. FOCUS MENU/ENTER AV MUTING Cursor buttons PAGE BACK button • When shipped from the factory, the source settings are as follows: Input mode Factory setting VIDEO NTSC(480i) Y/C NTSC(480i) Y, PB/B-Y, PR/R-Y AUTO Input mode COMPUTER 1 COMPUTER 2 - Factory setting AUTO AUTO - Notes • Depending on the signal from a device connected, adjustment may be needed after a dedicated source is set. If that is the case, adjust the appropriate items. • When the input mode (SOURCE) is VIDEO or Y/C, and if AUTO is set, the automatic detecting function may work, possibly causing the screen to be intermitted or disturbed. In that case, set to a dedicated source (forced mode). • When special effect playback (fast-forward/ twice-speed/triple-speed) is performed on a video deck, etc, the picture may be disturbed or intermitted, depending on the device. • When inputting 480p or 720p-DTV-format signal in COMPUTER2 input mode, use the dedicated source mode "SDTV(480p)" or "HDTV1(720p)". (At AUTO, 480p or 720p signal can not be detected.) 1 Press the MENU/ENTER button. • The main menu appears on the screen. s Main menu VIDEO AUTO(NTSC(480i)) PIXEL CLOCK POSITION PICTURE SOUND OPTIONS SOURCE DECODER AUTO(NTSC(480i)) LANGUAGE ENGLISH Submenu item (SOURCE) Notes • The selected item is shown in magenta color. Items shown in gray color cannot be operated or set in the current mode. • Items that can be set are different when video signals are input and when computer signals are input. • For dedicated source signals (corresponding frequency, etc.) for computer signals, see page 19. 2 Select a submenu item "SOURCE" using the cursor button 5 or ∞. • The SOURCE item (shown in text) is indicated in magenta color. 3 Press the MENU/ENTER button. • The submenu items, SOURCE menu, appears on the screen. SOURCE (AUTO) AUTO NTSC(480i) SDTV(480p) HDTV1(720p) HDTV2(1080i) PAL/SECAM PC-98 VGA1 VGA3 MAC13 VGA VESA SVGA1 SVGA2 MAC16 XGA1 XGA2 MAC19 MAC21 SXGA1 SXGA2 SXGA3 The display in ( ) shows the currently set status. (SOURCE menu) 4 Select the item to set using the cursor buttons 5/∞ or 2/3. • The item to set is shown in magenta color. SOURCE (AUTO) AUTO NTSC(480i) SDTV(480p) HDTV1(720p) HDTV2(1080i) PAL/SECAM PC-98 VGA1 VGA3 MAC13 VGA VESA SVGA1 SVGA2 MAC16 XGA1 XGA2 MAC19 MAC21 SXGA1 SXGA2 SXGA3 (To be continued on the next page) 46