JVC DX97US Instruction Manual - Page 31

SYSTEM Each setting is linked with "s SYSTEM", which appears when the Power Switch is set to "M". ● The parameters are the same as in the description on page 29. VIDEO DISPLAY The "n" (VIDEO DISPLAY) settings are effective only for video playback except "BRIGHT" and "AUX MIC". ● The parameters (except "OFF" in ON SCREEN settings) are the same as in the description (CAMERA DISPLAY) on page 29. [ ] = Factory-preset BRIGHT ੬ pg. 13, "Brightness Adjustment Of The Display" ON SCREEN OFF / [LCD] / LCD/TV When set to "OFF", the camcorder's display disappears. DATE/TIME [OFF] / AUTO / ON When set to "AUTO", the date/time are displayed in the following cases: ● When playback starts. The camcorder displays the date/ time when scenes are recorded. ● When the date is changed during playback. TIME CODE [OFF] / ON AUX MIC OFF / [ON] ੬ pg. 30, "AUX MIC" FEATURES FOR RECORDING EN 31 SNAPSHOT Recording Start/Stop Button LED Light FOCUS SET BACK LIGHT LIGHT LIGHT LED Light LED Light can be used to brighten the subject in the dark place during video recording or D.S.C. shooting. 1 Press LIGHT repeatedly to change the setting. OFF: Turns off the light. ON: The light is on always. ( appears.) AUTO: The light turns on automatically when dark. ( appears.) 2 Press the Recording Start/Stop Button to start video recording or SNAPSHOT to shoot a still image. NOTES: ● Be careful not to point the LED Light directly to eyes. ● If the light does not reach the subject, the Night-Alive function will be activated, and makes it possible to shoot the subject brighter. ● There is a difference in the brightness of the images shot between the center area which is illuminated by the LED Light and the surrounding areas (which will be darker). ● Since subjects are shot at a reduced shutter speed when the LED Light setting is "ON", they will appear slightly blurred. NIGHT ADVANCED FEATURES