JVC GD-V501U Installation Guide - Page 29

PICTURE Adjustments Item PICTURE Effect Adjustments Adjusts the proper picture contrast. Notes: (1) "COLOR" and, "TINT" settings cannot be adjusted for "RGB" and "PC" input Less More signal modes. BRIGHTNESS Darker Adjusts for easier viewing of dark pictures Brighter such as night scenes and black hair. (2) You can change the level of each function (PICTURE, BRIGHTNESS, COLOR, TINT, SHARPNESS) for each COLOR TINT (NTSC only) SHARPNESS Less Reddish More Greenish Adjusts color saturation. Adjust for natural flesh tones. Adjusts picture sharpness. PICTURE menu. (3) The setting details for STANDARD, DYNAMIC and CINEMA respectively are memorized separately for each input mode (VIDEO (S VIDEO), COMPONENT, RGB and PC). (4) The "TINT" setting can be adjusted for Less More NTSC signal only during "VIDEO Note: (S VIDEO)" input signal. In PICTURE, there is not a noticeable change even when contrast is increased with a bright picture or reduced with a dark picture. ADVANCED SETTINGS Item BLACK EXTENSION W/B HIGH R Effect Less More Less More Details Adjusts the dark shades of the image in gradiation. Adjusts the white balance for light red areas. W/B HIGH B Adjusts the white balance for light blue areas. Less More W/B LOW R Adjusts the white balance for dark red areas. Less More W/B LOW B Adjusts the white balance for dark blue areas. Less More GAMMA 2.0 2.2 2.5 Down Up Notes: (1) Carry out "W/B" adjustment as follows. A Adjust the white balance of the bright sections using the "W/B HIGH R" and "W/B HIGH B" settings. B Adjust the white balance of the dark sections using the "W/B LOW R" and "W/B LOW B" settings. C Repeat steps A and B to adjust. Steps A and B affect each other's settings, so repeat each step in turn to make the adjustment. (2) The adjustment values are memorized separately for each input mode (VIDEO(S VIDEO), COMPONENT, RGB and PC). (3) The adjustment range values should be used as an adjustment reference. Helpful Hint ( N / NORMALIZE Normalization) On the remote control unit, while the "ADVANCED SETTINGS" menu is displayed, if either the N button is pressed at any time or the (ACTION button) is pressed during "NORMALIZE", then all adjustment values are returned to the factory settings. 29