JVC GD-V501U Installation Guide - Page 36
H-FREQ. kHz/V-FREQ. Hz, SET UP for Input Signals
![]() |
View all JVC GD-V501U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
SET UP for Input Signals SYNC Select SIGNAL from the "SET UP" menu during RGB or PC input signal mode. Press to select each item. R Press to exit from adjust mode. SET UP COMPONENT/RGB-IN SELECT RGB SIGNAL SCREENSAVER OSD LANGUAGE ENGLISH (US) SET UP TIMER Press (ACTION) button SIGNAL [ RGB ] SYNC H & V H-FREQ. 31.5 kHz V-FREQ. 60.0 Hz SIGNAL [ PC ] SYNC H & V H-FREQ. 31.5 kHz V-FREQ. 60.0 Hz Setting RGB sync signal Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT). SYNC H & V: The H and V sync signals are input from the HD/VD connector. ON G: Uses a synchronized signal on the Video G signal, which is input from the G connector. SYNC ON VIDEO: The composite video signal input from the VIDEO input terminal is used by dividing the sync signals. SYNC H & V ON G ON VIDEO Setting PC sync signal Confirm that the input is set to PC INPUT (this setting is valid only for PC INPUT). SYNC H & V H & V: The H and V sync signals are input from the HD/VD connector. ON G: Uses a synchronized signal on the Video G signal, which is input from SYNC ON G the G connector. H-FREQ. (kHz)/V-FREQ. (Hz) Displays the H (Horizontal)/V (Vertical) frequencies. This display is valid only for RGB input and PC input. Display range: Horizontal 15.5 - 110 kHz Vertical 48 - 120 Hz H-FREQ. 31.5 kHz V-FREQ. 60.0 Hz 36
![](/manual_guide/products/jvc-gdv501u-installation-guide-aaae8c7/36.png)