JVC GD-V501U Installation Guide - Page 33

SCREENSAVER Setup of SCREENSAVER Time 5 Press to select START TIME/ FINISH TIME (When TIME OF DAY is selected). Press to select SHOW DURATION/ SAVER DURATION (When INTERVAL is selected). Press to select each time adjustment screen. SCREENSAVER FUNCTION MODE SHOW DURATION SAVER DURATION SIDE BAR ADJUST WHITE BAR SCROLL INTERVAL 0:00 0:00 HIGH SCREENSAVER FUNCTION MODE START TIME FINISH TIME SIDE BAR ADJUST WHITE BAR SCROLL TIME OF DAY 0:00 0:00 MID 6 Press to select HOURS ADJUSTMENT/ MINUTES ADJUSTMENT. Press to set up HOURS or MINUTES. button: Forward button: Back Press to store settings. Note : Timer function will not work unless "PRESENT TIME OF DAY" is set. START TIME START TIME HOURS ADJUSTMENT MINUTES ADJUSTMENT FINISH TIME FINISH TIME HOURS ADJUSTMENT MINUTES ADJUSTMENT 0:00 00 00 0:00 00 00 PERIODIC TIME SHOW DURATION HOURS ADJUSTMENT MINUTES ADJUSTMENT OPERATING TIME SAVER DURATION HOURS ADJUSTMENT MINUTES ADJUSTMENT 0:00 00 00 0:00 00 00 SIDE BAR ADJUST Do not display a picture in 4:3 mode for an extended period, as this can cause an after-image to remain on the side bars on either side of the display field. To prevent the appearance of such an after-image, change the brightness of the side bars. 1 To display the SCREENSAVER screen. (Refer to page 32, operation guide steps 1 and 2.) 2 Press to select the SIDE BAR ADJUST. Press to select OFF, DARK, MID, BRIGHT. OFF DARK MID side bars 4:3 Screen Display BRIGHT after-images SCREENSAVER FUNCTION MODE SHOW DURATION SAVER DURATION SIDE BAR ADJUST WHITE BAR SCROLL INTERVAL 0:00 0:00 MID 3 R Press to exit from SCREENSAVER. Notes: • Setting the side bar to bright mode for an extended period may result in occurrence of after-images. • The side bar may flash (alternate black/white) depending on the picture being shown on the screen. In such an occurrence, use the Cinema mode. 33