JVC GD-V501U Installation Guide - Page 32

SCREENSAVER (For preventing after-images) Do not display a still picture, especially in 4:3 mode, for any length of time. If the display must remain on, a SCREENSAVER should be used. 1 SET UP Press to display the SETUP menu screen. 2 Press to select the SCREENSAVER. SET UP COMPONENT/RGB-IN SELECT RGB SIGNAL SCREENSAVER OSD LANGUAGE ENGLISH (US) SET UP TIMER Press to select the SCREENSAVER screen. NEGATIVE / SCROLL selection 3 MODE selection Press to select the FUNCTION. SCREENSAVER Press to select the desired function. WHITE BAR SCROLL NEGATIVE FUNCTION MODE SHOW DURATION SAVER DURATION SIDE BAR ADJUST WHITE BAR SCROLL INTERVAL 0:00 0:00 BRIGHT WHITE BAR SCROLL : A white bar will scroll from left to right. NEGATIVE : A negative image will be displayed on the screen. 4 Press to select the MODE. SCREENSAVER Press to select each mode items. OFF FUNCTION MODE START TIME FINISH TIME SIDE BAR ADJUST WHITE BAR SCROLL TIME OF DAY 0:00 0:00 MID INTERVAL : Operates when SHOW DURATION and SAVER DURATION are set up and those times arrive. TIME OF DAY : Operates when START TIME and FINISH TIME are set up and those times arrive. ON : Operates when the (ACTION) is pressed. R To stop the SCREENSAVER under ON, press the button. If the MODE is at ON, the menu screen will disappear and the SCREENSAVER will be activated. After selecting TIME OF DAY or INTERVAL, the relevant SET UP TIME will become available for selection and the OPERATING TIME may be set. (Time cannot be set when "MODE" is "ON" or "OFF.") SCREENSAVER FUNCTION MODE START TIME FINISH TIME SIDE BAR ADJUST WHITE BAR SCROLL TIME OF DAY 0:00 0:00 MID SCREENSAVER FUNCTION MODE SHOW DURATION SAVER DURATION SIDE BAR ADJUST WHITE BAR SCROLL INTERVAL 0:00 0:00 HIGH SCREENSAVER FUNCTION MODE SHOW DURATION SAVER DURATION SIDE BAR ADJUST WHITE BAR SCROLL OFF 0:00 0:00 HIGH 32