JVC GRDF430U Instructions - Page 35

ADDITIONAL FEATURES FOR D.S.C. (GR-DF470/450 only) EN 35 To Reset The Number Of Prints Initializing A Memory Card 1 Perform steps 1 - 3 in "To Print All Still Images (One Print For Each)". 2 Press or to select "RESET", and press SET. The DPOF screen appears. 3 Press or to select "EXECUTE", and press SET. The normal playback screen appears. ● To cancel selection, select "RETURN". ● The number of prints is reset to 0 for all still images. CAUTION: While performing the above, never disconnect power, as this may cause the memory card to be corrupted. You can initialize a memory card any time. After initializing, all files and data stored in the memory card, including those which have been protected, are cleared. 1 Set the VIDEO/MEMORY Switch to "MEMORY". 2 Set the Power Switch to "PLAY" while pressing down the Lock Button located on the switch. 3 Press MENU. The Menu Screen appears. 4 Press or to select FORMAT "FORMAT", and press SET. The FORMAT screen appears. ERASE ALL EX I ST I NG DATA? 5 Press or to select "EXECUTE", and press EXECUTE RETURN SET. The memory card is initialized. ● When initialization is finished, "NO IMAGES STORED" or "NO E-MAIL CLIP STORED" appears. ● To cancel initialization, select "RETURN". DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK (GR-DF470/450 only) CAUTION: Do not perform any other operation (such as turning off the camcorder) during initialization. Also, be sure to use the provided AC Adapter, as the memory card may be corrupted if the battery becomes exhausted during initialization. If the memory card becomes corrupted, initialize it.