JVC GRDF430U Instructions - Page 54
Audio Dubbing
UPC - 046838018350
View all JVC GRDF430U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
54 EN EDITING ● The system may not work properly depending on the PC or capture board you are using. For GR-DF470/450 owners: "USB" appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC. NEVER disconnect the USB cable while "USB" is displayed on the LCD monitor since this can result in product damage. * GR-DF470/450 only Audio Dubbing The audio track can be customized only when recorded in the 12-BIT and SP modes. (੬ pg. 37) ● Use the provided remote control. Microphone Connector Speaker REW INSERT START/ STOP PAUSE PLAY STOP A.DUB Stereo Microphone 1 Play back the tape to locate the point where editing will start, then press PAUSE (9). 2 While holding A. DUB (D) on the remote control, press PAUSE (9). The "9D" and "MIC" indicators appear. 3 Press PLAY (U), then begin "narrating". Speak into the microphone. ● To pause dubbing, press PAUSE (9). 4 To end Audio Dubbing, press PAUSE (9), then STOP (8). To hear the dubbed sound during playback Set "NARRATION" to "ON" or "MIX". (੬ pg. 36, 40) NOTES: ● Sound is not heard from the speaker during Audio Dubbing. ● When editing onto a tape that was recorded at 12-BIT, the old and new soundtracks are recorded separately. ● If you dub onto a blank space on the tape, the sound may be disrupted. Make sure you only edit recorded areas. ● If feedback or howling occurs during TV playback, move the camcorder's microphone away from the TV, or turn down the TV's volume. ● If you change from 12-BIT to 16-BIT in midrecording and then use the tape for Audio Dubbing, it is not effective from the point where 16-BIT recording began. ● During Audio Dubbing, when the tape moves to scenes recorded in the LP mode, scenes recorded in 16-BIT audio or a blank portion, Audio Dubbing stops. ● Audio dubbing is also possible using an optional microphone connected to the MIC connector. ● While an optional microphone is connected, the built-in microphone is disabled. ● To perform Audio Dubbing with a video unit connected to the camcorder's AV connector, first set "S/AV INPUT" to "ON" in VIDEO Menu. (੬ pg. 36, 41) The "AUX" indication appears instead of "MIC".