JVC GRDF430U Instructions - Page 47

Wipe Or Fader Effects These effects let you make pro-style scene transitions. Use them to spice up the transition from one scene to the next. Wipe or Fader works when video recording is started or stopped. 1 Set the VIDEO/MEMORY Switch to "VIDEO". (GR-DF470/450 only) 2 Set the Power Switch to "M". 3 Set "v" to the desired mode. (੬ pg. 36) ● The WIPE/FADER menu disappears and the effect is reserved. ● The selected effect indicator appears. 4 Press the Recording Start/Stop Button to activate the Fade-in/out or Wipe-in/out. To deactivate the selected effect Select "OFF" in step 3. The effect indicator disappears. NOTES: ● You can extend the length of a Wipe or Fader by pressing and holding the Recording Start/Stop Button. ● Some Wipe/Fader Effects cannot be used with certain modes of Program AE with special effects. (See the right column.) In this case, the selected indicator blinks or goes out. WIPE/FADER OFF: Disables the function. (Factory-preset) FADER-WHITE: Fade in or out with a white screen. FADER-BLACK: Fade in or out with a black screen. FADER-B.W: Fade in to a color screen from a black and white screen, or fade out from color to black and white. WIPE-CORNER: Wipe in on a black screen from the upper right to the lower left corner, or wipe out from lower left to upper right, leaving a black screen. WIPE-WINDOW: The scene starts in the center of a black screen and wipes in toward the corners, or comes in from the corners, gradually wiping out to the center. FEATURES FOR RECORDING EN 47 WIPE-SLIDE: Wipe in from right to left, or wipe out from left to right. WIPE-DOOR: Wipe in as the two halves of a black screen open to the left and right, revealing the scene, or wipe out and the black screen reappears from left and right to cover the scene. WIPE-SCROLL: The scene wipes in from the bottom to the top of a black screen, or wipes out from top to bottom, leaving a black screen. WIPE-SHUTTER: Wipe in from the center of a black screen toward the top and bottom, or wipe out from the top and bottom toward the center leaving a black screen. Program AE With Special Effects 1 Set the Power Switch to "M". 2 Set "r" to the desired mode. (੬ pg. 36) ● The PROGRAM AE menu disappears and the selected effect is activated. ● The selected effect indicator appears. To deactivate the selected effect Select "OFF" in step 2. The effect indicator disappears. NOTES: ● Some modes of Program AE with special effects cannot be used during Night-Alive. ● When a subject is too bright or reflective, a vertical streak may appear (smear phenomenon). Smear phenomenon tends to occur when "SPORTS" or any mode of "SHUTTER 1/250 - 1/4000" is selected. ● Some modes of Program AE with special effects cannot be used with certain Wipe/Fader effects. (See the left column.) In this case, the selected indicator blinks or goes out. ADVANCED FEATURES CONTINUED ON NEXT PAGE