JVC GZ HD10 other - Page 57

Trouble, Action, Playback, Dubbing, Other problems

Page 57 highlights

Playback Dubbing Trouble The color of images looks strange. Noise can be heard. Images look unnatural on the TV (long and thin etc.) When dubbing, the connected video device does not start recording automatically. Action • When recording the white balance was not correctly adjusted. • When the video was recorded with x.v.Color™ set to [ON], change the setting as desired on TV. • Set [EFFECT] to [OFF]. • Do not move the camera suddenly during recording. (If the camera is moved suddenly during recording, the driving sound (hum) of the hard disk may have been recorded.) • Change [VIDEO OUTPUT] in the [BASIC SETTINGS] to match your TV. • Operate the video device manually to start and stop recording. The camera operates slowly when switching between video mode and still image mode, or when switching the power on or off. The camera gets hot. • Copy all files from the media onto your computer, and erase the files from the media. (If there are many still images (more than 1,000 files) on the media, it takes time for the camera to process the files.) • This is not a malfunction. The lamp does not flash during battery charging. The remote control doesn't work. • Check the remaining battery charge. (When the battery is fully charged, the lamp does not flash.) • When recharging in either a hot or cold environment, ensure that battery is being charged within the permitted temperature range. (If the battery is being recharged outside the permitted temperature range, recharging may stop to protect the battery.) • Replace the battery. • Set [REMOTE] in the [BASIC SETTINGS] to [ON]. • The remote control may not operate outdoors or in places exposed to strong light. Other problems EN 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

57
EN
Trouble
Action
Playback
The color of images
looks strange.
When recording the white balance was not correctly adjusted.
When the video was recorded with x.v.Color™ set to [ON], change
the setting as desired on TV.
Set [EFFECT] to [OFF].
Noise can be heard.
Do not move the camera suddenly during recording. (If the camera
is moved suddenly during recording, the driving sound (hum) of
the hard disk may have been recorded.)
Images look unnatural
on the TV (long and thin
etc.)
Change [VIDEO OUTPUT] in the [BASIC SETTINGS] to match
your TV.
Dubbing
When dubbing, the
connected video device
does not start recording
automatically.
Operate the video device manually to start and stop recording.
Other problems
The camera operates
slowly when switching
between video mode
and still image mode,
or when switching the
power on or off.
Copy all files from the media onto your computer, and erase the
files from the media.
(If there are many still images (more than 1,000 files) on the
media, it takes time for the camera to process the files.)
The camera gets hot.
This is not a malfunction.
The lamp does not flash
during battery charging.
Check the remaining battery charge.
(When the battery is fully charged, the lamp does not flash.)
When recharging in either a hot or cold environment, ensure that
battery is being charged within the permitted temperature range.
(If the battery is being recharged outside the permitted
temperature range, recharging may stop to protect the battery.)
The remote control
doesn’t work.
Replace the battery.
Set [REMOTE] in the [BASIC SETTINGS] to [ON].
The remote control may not operate outdoors or in places
exposed to strong light.