JVC GZ HD3 other - Page 66
Record Button, Quick Restart, Drop Detection, Remote, Auto Finalize, Update, Factory Preset
UPC - 046838031441
View all JVC GZ HD3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Changing the Menu Settings (Continued) Menus Settings: [ ] = Factory-preset RECORD BUTTON Enables the recording button [REC] on the LCD monitor. ` QUICK RESTART Enables the camcorder to start up quickly when you turn off the camcorder and then on again within 5 minutes by closing and opening the LCD monitor. ^ DROP DETECTION Prevents damage to the HDD by turning off the power automatically when it is detected that the camcorder dropped. ] REMOTE Turns on/off reception of the operation signal from the remote control. OFF: Deactivates the function. [ON]: Activates the function. OFF: Deactivates the function. [ON]: If the LCD monitor is opened again within 5 minutes, the camcorder starts quickly. The power consumption used for the 5 minute period after the LCD monitor is closed is approximately 1/3 that used during recording. This enables you to save more power than leaving the power on. OFF: Deactivates the function. [ON]: Activates the function. To turn on the camcorder when the drop detection worked, close the LCD monitor and open it again. NOTE • The built-in hard disk of the camcorder may not be protected even if the setting is [ON]. • When recording/playback stops even if the camcorder is not dropped, set the setting to [OFF] or set [REC MEDIA FOR VIDEO] to [SD]. (Z p. 68) OFF: Does not receive the signal from the remote control. [ON]: Enables operation with the remote control. OFF: Makes created DVDs recordable (not playable on device other than the camcorder). [ON]: Finalizes created DVDs so that they can be played back on DVD burner. _ AUTO FINALIZE Sets the DVD to a readable state. NOTE • When you play back a DVD created when [OFF] is set on DVD burner, select [FINALIZE] on the DVD creation screen. (Z p. 49) • When you create two or more DVDs at the same time, other than the last DVD is finalized automatically even if the setting is [OFF]. UPDATE Updates and improves the system software. YES: Performs this function. [NO]: Cancels this function. NOTE Information about obtaining system update will be made available on the JVC's web site. Z FACTORY PRESET Returns all the camcorder settings to their default values. YES: Performs this function. [NO]: Returns to the menu screen without executing reset. 66 EN