JVC GZX900US Guide Book - Page 13
GETTING STARTED, Preparing the Remote Control, Attaching the Core Filter to the DC cord
UPC - 046838039515
View all JVC GZX900US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
GETTING STARTED Preparing the Remote Control A battery is included inside the remote control at the time of purchase. Remove the insulation sheet before use. Beam Effective Area To Reinsert the Battery Remote Sensor Pull out the battery holder by pressing the lock tab. Lock Tab Lithium Battery (CR2025) Effective distance: Within 5 m (16.4 ft) NOTE The transmitted beam may not be effective or may cause incorrect operation when the remote sensor is directly exposed to sunlight or powerful lighting. Attaching the Core Filter to the DC cord The core filter reduces interference. Connect the end of the cable with the core filter to the camera. Release the stopper. 3 cm (1-3/16") Wind twice EN 13
1²
EN
Preparing the Remote Control
A battery is included inside the remote control at the time of purchase.
Remove the insulation sheet before use.
To Reinsert the Battery
Pull out the battery holder by pressing the lock
tab.
Lock Tab
Lithium Battery
(CR2025)
Beam Effective Area
Effective distance:
Within 5 m (16.4 ft)
Remote Sensor
NOTE
The transmitted beam may not be effective
or may cause incorrect operation when the
remote sensor is directly exposed to sunlight
or powerful lighting.
Attaching the Core Filter to the DC cord
The core filter reduces interference. Connect the end of the cable with the core filter to the camera.
Release the stopper.
3 cm (1-3/16”)
Wind twice
GETTING STARTED