JVC GZX900US Guide Book - Page 27
Turning on the Face Detection Mode, Press SNAPSHOT., Select, again., Press and hold SNAPSHOT halfway.
UPC - 046838039515
View all JVC GZX900US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
BRACKETING Records 5 continuous images from dark (-0.6EV) to bright (+0.6EV) based on the brightness of still images set in AUTO or MANUAL. After performing steps 1-2 3 Press SNAPSHOT. NOTE • When there is no SD, or when there is no remaining space on the SD card, it is not possible to save still images. • When the continuous shooting or bracketing indicator is blinking, do not set Scene Select to [PORTRAIT], [NIGHT & PORTRAIT], or [SPORTS]. (Z p. 37) • When Scene Select (Z p. 37) is set to [TWILIGHT], [SLEEPING FACE], or [FIREWORKS], the continuous shooting speed is slow. Recording still images with the face detection mode turned on 1 Press and hold SNAPSHOT halfway. 2 Press SNAPSHOT. Using the self-timer in the face detection mode Preparation: Set [SELF-TIMER] to [FACE DETECTION]. 1 Press SNAPSHOT. Faces are detected. Turning on the Face Detection Mode If you set this mode on, the camera detects the faces and adjust brightness and focus so that the faces are recorded clearly. Preparation: • Select the recording mode. • Select ! or # mode. Select . 2 The still image is recorded 3 seconds after the face of the photographer is detected. Photographer To turn off the face detection mode Select again. NOTE • If the LCD monitor is turned upside down, is not displayed. Change the setting when the LCD monitor is in the normal position. • You cannot turn on the face detection mode if [SELF-TIMER] is set to [FACE DETECTION]. (This is indicated by blinking .) • Depending on the condition, faces may not be detected. • If the face detection does not work correctly, turn off the mode before recording. EN 27