JVC KD-AV7010 Instructions - Page 78

ENGLISH Initial Setup-AUDIO MENU/PSM SIRIUS Radio Operations • If you change the "AMP GAIN" setting from General "HIGH" to "LOW" while the volume level is set higher than "30," the unit automatically changes the volume level to "30." • You can connect the JVC SIRIUS radio PnP (Plug and Play), KT-SR1000 or KT-SR2000, using the JVC SIRIUS radio adapter, Other Main Functions KS-U100K (not supplied). By turning on the power to the unit, you can turn on/off the JVC PnP. However, you cannot control it Assigning titles to the sources • When the CD changer is connected, you can assign titles to CDs in the CD changer. These titles can also be shown on the display if you insert the CDs in this unit. from this unit. • Signal strength bar increases as the receiving signal improves. If no signal is received, it disappears. • When changing the category or channel, invalid and unsubscribed channels are TV Tuner Operations skipped automatically. Skipping channels Storing stations in memory • When Auto Memory is carried out... - All TV stations previously stored are erased and TV stations are stored newly. - Received TV stations are preset in No.1 (lowest frequency) to No.12 (highest frequency). When Auto Memory is over, the TV station stored in No.1 will be automatically tuned in. • When storing a TV station manually, a previously preset TV station is erased when a new TV station is stored in the same preset number. • Preset TV stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again. • You cannot skip CH184. • If all channels in a category are skipped, the category itself is also skipped. 78