JVC KD-HDR44 Instructions - Page 14

Troubleshooting General Symptom Remedy/Cause Sound cannot be heard from the speakers. Adjust the volume to the optimum level. / Make sure the unit is not muted/paused. (page 6) / Check the cords and connections. "MISWIRING CHK WIRING THEN RESET UNIT" / "WARNING CHK WIRING THEN RESET UNIT" appears on the display and no operations can be done. Check to be sure the terminals of the speaker leads are covered with insulating tape properly, then reset the unit. (page 3) If the message does not disappear, consult your JVC car audio dealer or a company supplying kits. The unit does not work at all. Reset the unit. (page 3) "F-AUX" or "R-AUX" cannot be selected. Check the = setting. (page 13) Sound is sometimes interrupted while listening to an external component connected to the auxiliary input jack. Check to be sure the recommended stereo mini plug is used for connection. (page 10, 11) The correct characters are not displayed (e.g. album name). This unit can only display letters (upper case), numbers, and a limited number of symbols. SSM automatic presetting does not work. Store stations manually. Static noise while listening to the radio. Connect the antenna firmly. "AM" cannot be selected. Check the = setting. (page 13) Sound quality changes when receiving HD Radio stations. Fix the reception mode either to . (page 8) No sound can be heard. • is selected when receiving all digital broadcast of HD Radio station. Select . (page 8) • is selected when receiving weak digital signals or receiving conventional radio broadcast. Select . (page 8) Disc cannot be played back. Insert the disc correctly. CD-R/CD-RW cannot be played back and Insert a finalized CD-R/CD-RW (finalize with the component track cannot be skipped. which you used for recording). FM/AM Disc playback 14 ENGLISH