JVC KD-R470 Instruction Manual - Page 20

REFERENCES Change the display information Each time you press , the display information changes. • If the information is unavailable or not recorded, "NO TEXT", "NO NAME", or other information (eg. station name) appears. FM or AM Frequency Day/Clock (For FM Radio Broadcast Data System stations only) Station name (PS) Frequency Program type (PTY) Radio text+ Day/Clock (back to the beginning) CD or USB (For CD-DA) Playing time Day/Clock Disc name Track title (back to the beginning) (For MP3/WMA/WAV/FLAC files) Playing time Day/Clock Album title/Artist Track title Folder/file name (back to the beginning) USB-IPOD Playing time Day/Clock Album title/Artist Track title or ANDROID (back to the beginning) PANDORA Station name Shared/Radio Album title Artist Track title Playing time Day/Clock (back to the beginning) IHEARTRADIO Station name Track title Track Artist Day/Clock (back to the beginning) SIRIUS XM Channel no./Channel name Artist Song title Content information Category name Day/Clock (back to the beginning) AUX AUX Day/Clock BT AUDIO BT AUDIO Day/Clock 20 TROUBLESHOOTING Symptom Remedy Sound cannot be heard. • Adjust the volume to the optimum level. • Check the cords and connections. General "MISWIRING CHECK WIRING THEN PWR ON" appears. Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again. "PROTECTING SEND SERVICE" appears. Send the unit to the nearest service center. Source cannot be selected. Check the [SRC SELECT] setting. ( 4) Radio • Radio reception is poor. • Static noise while listening to the radio. Connect the antenna firmly. Disc cannot be ejected. Press and hold to forcibly eject the disc. Be careful not to drop the disc when it is ejected. "IN DISC" appears. Make sure nothing is blocking the loading slot when you eject the disc. "PLEASE" and "EJECT" appear alternately. Press , then insert the disc correctly. CD / USB / iPod Playback order is not as intended. The playback order is determined by the file name (USB) or the order in which files were recorded (disc). Elapsed playing time is not This depends on the recording process earlier. correct. "NOT SUPPORT" appears and track skips. Check whether the track is a playable format. ( 18, 19) "READING" keeps flashing. "CANNOT PLAY" flashes and/or connected device cannot be detected. • Do not use too many hierarchical levels and folders. • Reload the disc or reattach the USB device. • Check whether the connected device is compatible with this unit and ensure the files are in supported formats. ( 18, 19) • Reattach the device.