JVC KD-R470 Instruction Manual - Page 25

Wiring connection IMPORTANT We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. KD-R775S KD-R670 KD-R570 / KD-R470 / KD-R370 Vehicle dashboard Output terminals Factory wiring harness (vehicle) To the steering wheel remote control adapter Antenna terminal Light blue/yellow STEERING WHEEL REMOTE Signal cord (not supplied) Fuse (10 A) JVC Amplifier*1 *1 Firmly connect the ground wire of the amplifier to the car's chassis to avoid damaging the unit. Remote wire (not supplied) KD-R775S: Expansion port (12 V 500 mA) To the optional SiriusXM Vehicle Tuner (commercially available) ( 11) Part list for installation (A) Faceplate (B) Trim plate Custom wiring harness (separately purchased) Blue: To power antenna Blue/white: To amplifier Join the same color wires together. Blue/white: Remote (200 mA max.) Orange/white: Illumination Brown: Tel muting Ignition switch (C) Mounting sleeve Yellow: Battery 12 V *2 KD-R670 / KD-R570 / KD-R470 / KDR370: You can also connect a subwoofer speaker directly using this lead without an external subwoofer amplifier. For setting, 16. Recommended connection Red: Ignition 12 V Black: Ground Gray: Front speaker (right) Gray/black White: Front speaker (left) White/black Purple: Rear speaker (right) Purple/black Green: Rear speaker (left)*2 Green/black *2 Car fuse block Separate red wire Make this connection if your vehicle factory wiring harness does not have "12 V ignition switch" wire. (D) Wiring harness (E) Extraction key ENGLISH 25