JVC KD-X250BT Instruction Manual - Page 20

MMeenunoupeorpateiornas tions 1 (Hold) If no operation is done for about 60 seconds, the operation will be canceled. 2 3 Repeat step 2 if necessary.  To return to the previous menu, press .  To exit from the menu, press DISP or MENU. Menu item DEMO EQ PRESET Selectable setting (Initial: [XX]) For settings, ' page 4. For settings, ' page 19. EQ SETTING EASY EQ PRO EQ FADER *1*2 BALANCE *2 BASS BOOST R06 - F06[00]: Adjusts the front and rear speaker output balance. L06 - R06[00]: Adjusts the left and right speaker output balance. +01/+02: Select your preferred bass boost level. [OFF]: Cancels. LOUD (Loudness) [LOW]/HIGH: Boosts low or high frequencies to produce a well-balanced sound at a low volume level. OFF: Cancels. VOL ADJUST (Volume adjust) -05 - +05[00]: Presets the volume adjustment level of each source, compared to the FM volume level. Before adjustment, select the source you want to adjust. ("VOL ADJ FIX" appears if "FM" is selected.) AUDIO L/O MODE (Line output mode) SUB. W *3 (Subwoofer) SUB.W LPF *4 (Subwoofer lowpass filter) Select if the REAR/SW terminals are used for connecting the speakers or subwoofer (through an external amplifier). SUB.W: Subwoofer [REAR]: Rear speakers OFF: Cancels. [ON]: Turns on the subwoofer output. [THROUGH]: All signals are sent to the subwoofer. LOW 55Hz/MID 85Hz/HIGH 120Hz: Audio signals with frequencies lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer. SUB.W LEVEL *4 -08 - +08[00]: Adjusts the subwoofer output level. (Subwoofer level) *1 If you are using a two-speaker system, set the fader level to "00". *2 This adjustment will not affect the subwoofer output. *3 Displayed only when is set to . *4 Displayed only when is set to . 20 |‫ޓ‬ENGLISH