JVC KD-X250BT Instruction Manual - Page 22

BLUETOOTH Menu operations Menu item IPOD SWITCH (iPod/iPhone control) PHONE *7 AUDIO APPLICATION DELETE PAIR P. BOOK WAIT SET PINCODE AUTO CNNCT INITIALIZE INFORMATION AM *10 Selectable setting (Initial: [XX]) [HEAD MODE]/IPOD MODE/EXT MODE: For settings, ' page 9. (Displayed only when the source is "USB-IPOD".) CONNECT/DISCONNECT: Connects or disconnects the Bluetooth phone/ audio device. (' page 13) CONNECT/DISCONNECT: Connects or disconnects the JVC Smart Music Control *8 in the smart phone. For settings, ' page 13. Copies up to 400 numbers from the phonebook memory of a connected phone to the unit via OPP. Changes the PIN code (1 to 6-digits). (Default PIN code: 0000) Turn the volume knob to select a number, press  /  to move to the entry position. After entering the PIN code, press the volume knob to confirm. [ON]: Establishes connection automatically with the Bluetooth device when the unit is turned on. OFF: Cancels. YES: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). [NO]: Cancels. PH CNNT DEV/AU CNNT DEV/APP CNT DEV *9: Displays connected phone/audio/application device name. MY BT NAME: Displays the unit name (JVC UNIT). MY ADDRESS: Displays the address of this unit. BT VERSION: Displays the Bluetooth version of this unit. [ON]/OFF: Enables or disables "AM" in source selection. SRC SELECT PANDORA *10 [ON]/OFF: Enables or disables "PANDORA" in source selection. AUX *10 [ON]/OFF: Enables or disables "AUX" in source selection. *7 will not be displayed if two Bluetooth phones are connected at the same time. *8 JVC Smart Music Control is designed to view JVC car receiver status and perform simple control operations on Android smart phones. For JVC Smart Music Control operations, visit JVC website: (English website only). *9 Displayed only when a Bluetooth phone/audio player/application is connected. *10 Displayed only when the unit is in any source other than the corresponding source "AM/ PANDORA/AUX". 22 |‫ޓ‬ENGLISH