JVC KW-NT510HDT Instruction Manual - Page 92
To change the crossover frequency of the, speakers
View all JVC KW-NT510HDT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
ENGLISH Setting the Sound 5 Touch or next to to set the size of the speaker. To change the crossover frequency of the speakers: Set the crossover frequency between the front/rear speakers and the subwoofer, slope (attenuation rate) and phase of the subwoofer. 1 If the size is unknown, select
92
ENGLISH
Setting the Sound
To change the crossover frequency of the
speakers:
Set the crossover frequency between the front/rear
speakers and the subwoofer, slope (attenuation rate)
and phase of the subwoofer.
1
2
Touch the button for the speaker where you
want to change the crossover frequency.
3
Touch
or
to set each item of the front
(or rear) speaker and subwoofer.
5
Touch
or
next to <Size> to set the
size of the speaker.
If the size is unknown, select <
6-1/2”
>.
If there is no speaker, select <
None
>.
• <
None
> (without speaker) cannot be set for
the size of the front speaker.
6
Only for the front speaker, touch
or
next to <Tweeter> to set the size of the
tweeter.
• When <
Size
> is set to <
None
> for the
subwoofer, Crossover cannot be adjusted for the
subwoofer.
• When <
Size
> is set to <
None
> for the rear
speaker, Crossover cannot be adjusted for the
rear speaker.