JVC LT-32DM22 Instructions - Page 34
Connections to other equipment, continued
View all JVC LT-32DM22 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Connections to other equipment (continued) To connect an audio system This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the TV's remote control. To control the audio, turn on the TV and the stereo amplifier, and turn off the TV's built-in speakers (see "Speakers" on page 18). Rear of the unit Amplifier To VAR. (VARIABLE) AUDIO (L/R) OUT To Audio (L) Input Audio cord (not supplied) To Audio (R) Input NOTE: • To hear sound when using an external audio amplifier, the volume of both the TV and the amplifier must be set above 0 (zero). • For example, if the volume of the TV is set to 0, you will not be able to hear any sound, even if the volume of the amplifier is at its highest level. To connect a HDMI or a DVI device to the unit The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device. When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required. Rear and left of the unit To PC/DVI AUDIO IN To HDMI IN Audio cord (not supplied) HDMI - to - DVI adapter cable (HDMI type A connector) (not supplied) HDMI cable (type A connector) (not supplied) To DVI output or To HDMI output DVI device HDMI device NOTE: • When using HDMI1/DVI IN to connect your HDMI or DVI devices, you must select the corresponding audio input source (HDMI or DVI) on the menu screen (see page 18). Otherwise you will only see the image with no sound. 34