JVC MX-KA3 Instruction Manual - Page 11

Using the Tuner Numeric keys ¢ ¡ X FM/AM FM MODE SET FM/AM 4 22 A B Band display, Frequency display, Preset channel FM mode indicators * When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section. You can listen to FM and AM stations. Stations can be tuned in manually, automatically, or from preset memory storage. ❏ Before listening to the radio: • Make sure that both the FM and AM antennas are correctly connected. (See pages 4 and 5). Setting the AM Tuner Interval Spacing When shipped, the AM tuner interval is set to 9 kHz spacing (50 kHz spacing for FM broadcast). You can change it to 10 kHz spacing. To select 10 kHz intervals, while holding down the ¢ button on the Unit in Standby mode, press the % STANDBY/ON button on the Unit to turn on the power (at the same time, the 100 kHz spacing is selected for FM broadcast). To select 9 kHz intervals again, while holding down the 4 button on the Unit in Standby mode, press the % STANDBY/ON button on the Unit to turn on the power. [10 kHz Intervals] [9 kHz Intervals] STANDBY STADBY / ON STANDBY STADBY / ON One Touch Radio Just press the FM/AM button to turn on the System and start playing the station you were last tuned to. ❏ You can switch from any other sound source to the radio by pressing the FM/AM button. Tuning In a Station 1 Press the FM/AM button. The Band and Frequency you were last tuned to appear on the display. (If the last station was selected using the preset number, the preset number appears first.) Each time you press the button, the band alternates between FM and AM. FM / AM FM /AM or (on the Unit) (on the Remote Control) 9