JVC MX-KA3 Instruction Manual - Page 17

Using the CD Player Random Play The tracks of all the CDs will play in no special order when you use this mode. • To use Repeat Play for Random Play, press the REPEAT but- ton to select "ALL" or "1" before starting playback. For details, see "Repeating Tracks"mentioned below. 1 In Stop mode, set the CD Player in Random Play mode. On the Unit Press the RANDOM button to light the "RANDOM" indicator. At the same time, "RANDOM" appears on the display. On the Remote Control Press the PROGRAM/RANDOM button until the "RANDOM" appears on the display. The "RANDOM" indicator also lights up on the display. Each time you press the button, the display changes as follows: PROGRAM = RANDOM = Blank display (Normal Play) = (back to the beginning) 2 Press the CD 6 button. The tracks on all the CDs are played in random order. To stop playing, press the 7 button. To skip a track during playback, press the ¢ button to jump to the next track in the random sequence. To exit Random Play mode, while the CD Player is stopped, press the RANDOM button on the Unit or the PROGRAM/RANDOM button on the Remote Control again to light off the "RANDOM" indicator. Normal Play resumes. Repeating Tracks You can repeat all tracks or individual track, as many times as you like. Press the REPEAT button. The Repeat indicator changes with each press of the button, as follows: ALL= 1CD = 1 = Blank display = (back to the beginning) REPEAT ALL: In Normal Play mode, repeats all the tracks on all the CDs. In Program Play mode, repeats all the tracks in the program. In Random Play mode, repeats all the tracks on all the CDs in random order. REPEAT 1CD: Repeats all tracks on one CD. (Selectable in Normal Play only) REPEAT 1: Repeats one track. To stop playing, press the 7 button. Changing the source to the other (e.g. Tuner) will also stop playing. To exit Repeat mode, press the REPEAT button until the Repeat indicator on the display goes out. ❏ Repeat mode remains in effect during the following Play Mode changing: a. PROGRAM PLAY MODEÔNORMAL PLAY MODE b. RANDOM PLAY MODE ÔNORMAL PLAY MODE c. PROGRAM PLAY MODEÔRANDOM PLAY MODE Tray Lock Function In order to safely keep the CD in the CD Player, the tray can be electronically locked. When the electronic lock is on, the tray cannot be opened even if the CD Open/Close 0 button on the Unit is pressed. Locking the Tray 1 Turn on the System and enter CD mode. 2 While pressing down the 7 button, press the CD Open/Close 0 button on the Unit. "LOCKED" appears on the display. • If you try to open the tray by pressing the 0 button, "LOCKED" appears on the display to let you know that the tray has been locked. Unlocking the Tray Repeat above steps 1 and 2. "UNLOCKED" appears on the display. Now, you can use the tray normally. • Even after the System is unplugged, the tray lock condition will be retained for a few days. To unlock the tray after powering up, you need to perform the unlocking operation. 15