JVC MX-KA3 Instruction Manual - Page 9

Basic Operations ) Numeric keys % STANDBY/ON Display SOUND MODE SOUND TURBO ACTIVE BASS EX. PHONES STANDBY indicator % STANDBY/ON VOLUME SOUND MODE ACTIVE BASS EX. SOUND TURBO VOLUME +,- FADE MUTING Sound Mode indicator SOUND TURBO indicator BASS indicator Level bar Various information Status bar (Indicates various statuses.) * When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section. Turning the Power On and Off Turning the System On 1 Press the % STANDBY/ON button. STANDBY STANDBY/ON STADBY / ON or The display comes on and "WELCOME" is displayed once. The STANDBY indicator goes out. The System comes on ready to continue in the mode it was in when the power was last turned off. • For example, if the last thing you were doing was listening to a CD, you are now ready to listen to a CD again. If you wish, you can change to another source. • If you were listening to the Tuner last, the Tuner comes on playing the station it was last set to. Turning the System Off 1 Press the % STANDBY/ON button again. STANDBY STANDBY/ON STADBY / ON or "GOOD BYE" is displayed and the display goes out, except for the clock display. The STANDBY indicator lights up. (The display is dimmed.) • Some power is always consumed even though power is turned off (called Standby mode). • To switch off the System completely, unplug the AC power cord from the wall outlet. When you unplug the AC power cord, the clock will be reset to 0:00 immediately. Adjusting the Volume Turn the VOLUME control on the Unit clockwise to increase the volume or turn it counterclockwise to decrease the volume. Press the VOLUME + button on the Remote Control to increase the volume or press the VOLUME - button on the Remote Control to decrease the volume. You can set the volume level to MIN, 1-31, or MAX. CAUTION: • DO NOT turn on the System and/or start playing any source without first setting the VOLUME control to minimum, as a sudden blast of sound could damage your hearing, speakers and/or headphones. For private listening Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers. Be sure to turn down the volume before connecting or putting on headphones. 7