JVC RMP-2580U RM-P2580 Dome Controller Instructions (1148KB) - Page 30

6. OTHER TROUBLESHOOTING Symptom Video is not displayed. Check • Is the power supply connected properly to all off the cameras? • Are the cameras connected properly to the VIDEO INPUT connectors? • Are the camera heads compatible with this unit? Ref. Page Pages 21, 22 The cameras cannot be initialized. - The cameras point in arbitrary directions after initialization. None of the remote control function operate. • Preset their home positions. Page 27 • Are the cameras connected properly to the TO CAMERA connectors? • Are the DIP switches on the cameras set properly? ( REF. : Instruction manuals of the cameras in use.) • Is the unit in the KEY LOCK status? • Are the cameras connected properly to the TO CAMERA connectors? • Are the DIP switches of the cameras set properly? ( REF. : Instruction manuals of the cameras in use.) • Is the unit in the KEY LOCK status? • Are the camera IDs set to match correctly the VIDEO INPUT connector numbers? • Is MAX CAMERA set to match the number of connected cameras? • Is CAMERA SELECTION set to a position other than DISABLE? • Have positions been preset? Pages 21, 22 Page 15 Pages 21, 22 The PAN/TILT or lens controls cannot be operated manually. Page 15 Page 29 Page 29 The video signal from a camera does not appear when the camera is selected. The camera does not move to the position selected. Page 27 The speed of camera movement when using the PAN/TILT control is too slow. Alarm operation does not occur when an alarm signal is input. The alarm text is not displayed and/or buzzer does not sound when an alarm signal is input. • Is P/T SPEED set as required? Page 29 • Is the terminal (one of the DATA I/O terminals) where the alarm signal is input properly set and connected? Item "I/O" on page 30. • Are items ALARM TEXT and BUZZER TIME set to NONE? Page 31 Page 32 If the problem still cannot be solved after following the above checks, please consult your nearest authorised JVC service agent. 33