JVC RX-778VBK Instruction Manual - Page 25
Adjusting the 3D-PHONIC Modes, Adjusting the DAP Modes
UPC - 046838255915
View all JVC RX-778VBK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
English IMPORTANT: When using the remote control, check to see if its remote control mode selector is set to the correct position: To operate this receiver, set it to "AUDIO/TV/ VCR" (except when selecting the DBS tuner as the source). AUDIO/ TV/VCR CATV/DBS Adjusting the 3D-PHONIC Modes 3. Press EFFECT to select an effect level you want. • Each time you press the button, the effect level changes as follows: EFFECT 7/P DSP EFFECT 1 DSP EFFECT 2 DSP EFFECT 3 DSP EFFECT 5 DSP EFFECT 4 As the number increases, the selected 3D-PHONIC mode becomes stronger. Once you have adjusted the 3D-PHONIC modes, the adjustment is memorized for each 3D-PHONIC mode. Adjusting the DAP Modes Before you start, remember... • Make sure that you have set the speaker information correctly (see page 14). • There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again. On the front panel: 1. Press DSP MODE repeatedly until DSP MODE "3D ACTION (or 3D DIGITAL)" or "3D THEATER" appears on the display. The 3D-PHONIC, DSP, PRO LOGIC and selected 3D-PHONIC mode indicators also light up on the display. 2. Adjust the effect level. BALANCE/SURROUND ADJUST 1) Press BALANCE/SURROUND ADJUST repeatedly until "DSP EFFECT" appears on the display. The display changes to show the current setting. MULTI JOG 2) Turn MULTI JOG to select the effect level. • As you turn it, the effect level changes as follows: DSP EFFECT 1 DSP EFFECT 2 DSP EFFECT 3 DSP EFFECT 5 DSP EFFECT 4 As the number increases, the selected 3D-PHONIC mode becomes stronger. From the remote control: 1. Press SURROUND MODE repeatedly until "3D ACTION (or SURROUND MODE 3D DIGITAL)" or "3D THEATER" appears on the display. The 3D-PHONIC, DSP, PRO LOGIC and selected 3D-PHONIC mode indicators also light up on the display. Once you have adjusted the DAP modes, the adjustment is memorized for each DAP mode. Before you start, remember... • Make sure that you have set the speaker information correctly (see page 14). • There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again. • You cannot adjust the rear speaker output level when you have set "REAR SPK" to "NONE." See page 14. • When the DAP mode is used with the SEA mode (see page 19), sounds may be distorted. If this happens, turn off the SEA mode. On the front panel: 1. Press DSP MODE repeatedly until DSP MODE the DAP mode - LIVE CLUB, DANCE CLUB, HALL, or PAVILION - appears on the display. The DSP and selected DAP mode indicators also light up on the display. • When you have set "REAR SPK" to "NONE," the 3D- PHONIC indicator also lights up. 2. Adjust the speaker output levels. 1) Press BALANCE/SURROUND ADJUST repeatedly until one of the indications appears on the display. "REAR L LEVEL": To adjust the left rear speaker level. "REAR R LEVEL": To adjust the right rear speaker level. 2) Turn MULTI JOG to adjust the selected speaker output level (from -10 dB to +10 dB). 3) Repeat 1) and 2) to adjust the other speaker output level. BALANCE/SURROUND ADJUST MULTI JOG 2. Press SOUND. The 10 keys are activated for sound adjustments. SOUND 23