JVC RX-D212B Instructions - Page 37
AV COMPU LINK, remote control, system - rx manual
UPC - 046838026058
View all JVC RX-D212B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
English AV COMPU LINK remote control system The AV COMPU LINK remote control system allows you to operate JVC's video components (TV, DVD player*, and VCR) through this receiver. This receiver is equipped with the AV COMPU LINK-III, which has added a function to operate JVC's video components through the component video jacks. To use this remote control system, you need to connect the video components you want to operate, following the diagrams below and the procedures on page 36. • Refer also to the manuals supplied with your video components. * "DVD player" on pages 35 and 36 can be replaced with "DVD recorder." Connections 1: AV COMPU LINK connection TV AV COMPU LINK-III AV COMPU LINK EX Connections 2: Video cable connection This receiver is equipped with three types of video terminals- composite video, S-video, and component video, and the signals coming into this receiver through one type of video terminals can output only through the terminal of the same type. So you need to connect the video components to this receiver using one of the following three ways. • When using the AV COMPU LINK remote control system, set the video input for the DVD player and the VCR correctly (see "Selecting the component video input mode-DVD VIDEO IN/ VCR VIDEO IN/DBS VIDEO IN" on page 25); otherwise, the correct input for this receiver will not be selected on the TV. Case 1: When connecting the source equipment to the receiver through the S-video terminals, connect this receiver to the TV's video input 1 terminal using S-video cables. S-video cable S-video cable Source equipment RX-D212B TV To video input 1 Case 2: When connecting the source equipment to the receiver through the composite video jacks, connect this receiver to the TV's video input 2 terminal (composite video input) using composite video cables. Composite video cable Composite video cable Monaural mini-plugs (not supplied) AV COMPU LINK-III Source equipment RX-D212B TV To video input 2 (Composite) Monaural mini-plugs (not supplied) AV COMPU LINK DVD player AV COMPU LINK Case 3: When connecting the source equipment to the receiver through the component video jacks, connect this receiver to the TV's video input 2 terminals (component video input) using component video cables. Component video cable Component video cable Source equipment RX-D212B TV To video input 2 (Component) IMPORTANT: VCR The AV COMPU LINK remote control system cannot control the DBS tuner connected to the DBS IN jacks. NOTES • When connecting the receiver and a TV with the AV COMPU LINK EX terminal by using a component video cable, you cannot use Automatic selection of TV's input mode (see page 36). • When connecting only the VCR or DVD player to this receiver, connect it directly to the receiver using cable with the monaural mini-plugs. • You can connect only the TV with AV COMPU LINK EX or AV COMPU LINK-III terminal to the AV COMPU LINK-III terminal. 35