JVC RX-D212B Instructions - Page 9
Connecting audio/video components - av
UPC - 046838026058
View all JVC RX-D212B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English Connecting audio/video components Do not connect the AC power plug to the wall outlet until all connections are completed. This receiver is equipped with the following video terminals- composite video, S-video, and component video terminals. • If your video components have S-video (Y/C-separation) and/or component video (Y, PB, PR) jacks, connect them using an Svideo cable (not supplied) or component video cable (not supplied). By using these terminals, you can get better picture quality in the order: Component > S-video > Composite Turn off all components before making connections. • When you connect other components, refer also to their manuals. DO NOT use a TV through a VCR or a TV with a built-in VCR; otherwise, the picture may be distorted. IMPORTANT: This receiver can convert video signals as follows: • Composite video signals can be converted into both S-video signals and component signals. • S-video signals can be converted into component signals. • Component signals cannot be converted. When converting video signals, there are some points to observe. For details, see "About video signal conversion" on page 10. CAUTION: If you connect a sound-enhancing device such as a graphic equalizer between the source components and this receiver, the sound output through this receiver may be distorted. If your video components have AV COMPU LINK terminal See also page 35 for detailed information about the connection and the AV COMPU LINK remote control system. 7 Connecting a DVD recorder or DVD player DVR DVR/DVD OUT(REC) IN(PLAY) COMPONENT VIDEO Y PB VCR(DBS) DVR/DVD IN IN PR MONITOR OUT Green Blue Red Component video cable (not supplied) Å DVD recorder or DVD player DVR DVR/DVD OUT(REC) IN(PLAY) White Red Red White Stereo audio cable (not supplied) Composite video cable (not supplied) S-video cable (not supplied) Composite video cable (not supplied) NOTES • When connecting a DVD recorder or DVD player to the component video input jacks, select the component video input mode (DVD VIDEO IN) correctly. If you do not, you cannot view the playback picture on the TV or the AV COMPU LINK remote control system cannot operate properly. See page 25 for details. • When using a stereo audio cable as the illustration above, set the audio input mode to "ANALOG." For details, see "Selecting the analog or digital input mode" on page 12. • You can enjoy digital sound if using a digital coaxial or optical cable. When shipped from the factory, the digital input terminal setting for a DVD recorder and DVD player is set to use the digital coaxial terminal (DIGITAL IN 1 (DVR/DVD)). For details of digital connection, see page 10. Å To component video output • Connect Y, PB, and PR correctly. ı To left/right audio channel output Ç Only for DVD recorder: To left/ right audio channel input Î To composite video output ‰ To S-video output Ï Only for DVD recorder: To S-video input Ì Only for DVD recorder: To composite video input 7