JVC RXD702B Instructions - Page 40

English 7 Adjusting the liveness effect for DSP modes -LIVENESS This setting is available only when one of the DSP modes (except ALL CH STEREO) is in use. To activate DSP mode, see page 45. • If "SURROUND SPK" is set to "NO" (see page 28), this item is not adjustable. • Once you have made an adjustment, it is memorized for each DSP mode. • You cannot adjust this item directly from the remote control. Adjustable range: 1 to 5 (in 1 step intervals) Initial setting: LIVENESS: 3 As the number increases, the attenuation level of reflections over time decreases so that acoustics change from "Dead" to "Live." Normally, select "3." 7 Adjusting the panorama control for Pro Logic IIx Music and Pro Logic II Music-PANORAMA This setting is available when Pro Logic IIx Music or Pro Logic II Music is activated for the analog or digital 2-channel sound signal. To activate Pro Logic IIx Music or Pro Logic II Music, see page 45. • Once you have made an adjustment, it is memorized until you change the setting. • You cannot adjust this item directly from the remote control. PANORAMA: ON PANORAMA: OFF Select to add "wraparound" sound effect with side-wall image. Select to listen to originally recorded sound. 7 Adjusting the sound localization of the center channel-CENTER GAIN This setting is available only when Neo:6 Music is in use. • If "CENTER SPK" is set to "NO" (see page 28), this item is not adjustable. • Once you have made an adjustment, it is memorized until you change the setting. • You cannot adjust this item directly from the remote control. Adjustable range: 0 to 1.0 (in 0.1 step intervals) Initial setting: CENTER GAIN: 0.3 As the number increases, the center channel will be localized clearly. Normally, select "0.3." 7 Adjusting the center tone-CENTER TONE This setting is available when one of the Surround/DSP modes is in use. To activate Surround/DSP mode, see page 45. • If "CENTER SPK" is set to "NO" (see page 28), this item is not adjustable. • This setting is common to all Surround modes, and is memorized separately for DSP modes. Adjustable range: 1 to 5 (in 1 step intervals) Initial setting: CENTER TONE: 3 As the number increases, the dialogue becomes stronger. Normally, select "3." • When the center tone is set to other than "CENTER TONE: 3," the C.TONE indicator lights up on the display. Initial setting: PANORAMA: OFF 7 Adjusting the center channel localization for Pro Logic IIx Music and Pro Logic II Music-CENTER WIDTH This setting is available when Pro Logic IIx Music or Pro Logic II Music is activated for the analog or digital 2-channel sound signal. To activate Pro Logic IIx Music or Pro Logic II Music, see page 45. • If "CENTER SPK" is set to "NO" (see page 28), this item is not adjustable. • Once you have made an adjustment, it is memorized until you change the setting. • You cannot adjust this item directly from the remote control. Adjustable range: OFF and 1 to 7 (in 1 step intervals) Initial setting: CENTER WIDTH: 3 As the number increases, the center channel sound moves toward the left and right speakers. Normally, select "3." 7 Adjusting the sound localization position for Pro Logic IIx Music and Pro Logic II Music -DIMENSION This setting is available when Pro Logic IIx Music or Pro Logic II Music is activated for the analog or digital 2-channel sound signal. To activate Pro Logic IIx Music or Pro Logic II Music, see page 45. • Once you have made an adjustment, it is memorized until you change the setting. • You cannot adjust this item directly from the remote control. Adjustable range: 1 to 7 (in 1 step intervals) Initial setting: DIMENSION: 4 As the number increases, the sound localization moves towards forward from backward. Normally, select "4." From the remote control: Press C. TONE repeatedly to select the level you want to adjust. 1 2 3 4 5 6 7 8 9 10 0 10 7 Aligning the vertical localization of the center channel for Surround/DSP modes -CNTR ALIGNMENT This setting is available when one of the Surround/DSP modes (except PLIIx MUSIC, PLII MUSIC, NEO:6 MUSIC, and ALL CH STEREO) is in use. To activate Surround/DSP mode, see page 45. • If "CENTER SPK" is set to "NO" (see page 28), this item is not adjustable. • Once you have made an adjustment, it is memorized for each Surround/DSP mode. • You cannot adjust this item directly from the remote control. CNTR ALIGNMENT: ON CNTR ALIGNMENT: OFF Select this when you cannot feel as if the actors or singers are speaking or singing on the screen. Center alignment is turned off. Initial setting: CNTR ALIGNMENT: OFF 38