JVC SR-9090U SR-9090U Timelapse Recorder Instruction Manual (1137KB) - Page 10

2 CONTROLS AND CONNECTORS 2-1 Front Panel 24 25 26 SR-9090U REC REC STOP REC CHECK OPERATE HDR EJECT OPERATE RESET/ CANCEL ON SCREEN SHIFT REW REVERSE PAUSE PLAY FF TRACKING V. LOCK TIMER SEARCH DISPLAY LOCK CNT RESET MENU TIME MODE - SET FIELD REV FIELD ADV - + - + + 16 17 18 19 ^ [SEARCH] button Use to search the alarm recorded section or a section recorded at a specified date and time. In the Stop mode, select the search mode by pressing this button. • Press once to engage the Alarm Search mode. • Press twice to engage the Alarm Scan mode. • Press three times to engage the Date/Time Search mode. • Press four times to release the search mode. After the search mode is selected with this button, press the [FF] or [REW] button to execute the search operation in the selected mode. For details, refer to page 49. 20 21 22 23 w [TIME MODE/SET +/-] buttons • Use to select the recording and playback speed mode. Available recording/playback speed modes vary depending on the setting of menu switch on the screen. Each time these buttons are pressed, the recording/ playback speed mode changes as follows. The recording/ playback speed mode is shown on the display. HDR recording: OFF 2H: Standard 6H: 3x 24H: 24-hour SP timelapse 48H: 48-hour SP timelapse 72H: 72-hour SP timelapse 120H: 120-hour SP timelapse 168H: 168-hour SP timelapse 240H: 240-hour SP timelapse 480H: 480-hour SP timelapse 960H: 960-hour SP timelapse HDR recording: ON 2H: Standard 6H: 3x 24H: 24-hour EP timelapse 48H: 48-hour EP timelapse 72H: 72-hour EP timelapse 120H: 120-hour EP timelapse 168H: 168-hour EP timelapse 240H: 240-hour EP timelapse 480H: 480-hour EP timelapse 960H: 960-hour EP timelapse & [DISPLAY] button Selects which data - current time, control tape counter (00H 00M 00S - 23H 59M 59S) or reel tape counter (0 - 9999) - is displayed. Each time this button is pressed, the display switches to the next item. * [LOCK] button Press to activate the operation lock function. • ( [CNT RESET] button When the display shows the control tape counter or reel tape counter, press this button to reset to "00H00M00S" or "0000". Also use these buttons during date/time setting, timer program setting and menu switch setting to specify setting values. • Use these buttons on the normal screen to move the display position or recording position of on-screen information. The position can be moved down by pressing the 7 button and to the right by pressing the t button. • Use these buttons on the menu screen to select the desired item in date/time setting, timer program setting and menu switch setting. e [ON SCREEN/SHIFT 7/t] buttons ) [RESET/CANCEL] button • In the Timer Program Setting mode, press this button to cancel the program settings. For details, refer to "Timer Recording" on page 36. • Also press this button to interrupt alarm recording or to reset the alarm input data or power loss (power failure) data. For details, refer to pages 21 and 39. • Resets the seconds in the currently displayed time to 00 when pressed together with the ( [CNT RESET] button (except in menu setting mode). - When the seconds value is 29 or less, the minutes value is the same but the seconds value is reset to 0. (eg. 12:34:29 [ 12:34:00) - When the seconds value is 30 or more, the seconds value is reset to "00" and the minutes value is increased by one. (e.g. 12:34:30 [12:35:00) r Display section For details, refer to page 11. t [OPERATE] indicator Lights when the [OPERATE] button is turned on. y [HDR] indicator Lights in the HDR recording and HDR playback modes. * HDR: High Density Recording • For details on HDR recording, refer to page 28. q [MENU] button Press to display the date/time, timer program, and various other menu setting screens, as well as the hour meter, on the monitor. Press again to cancel the menu or hour meter display. 10