JVC SR-9090U SR-9090U Timelapse Recorder Instruction Manual (1137KB) - Page 29

6 RECORDING 6-1 Switch Setting During Recording [ON SCREEN 7] button [ON SCREEN f] button SR-9090U REC [REC] indicator REC STOP REC CHECK OPERATE HDR EJECT OPERATE RESET/ CANCEL ON SCREEN SHIFT REW REVERSE PAUSE PLAY FF TRACKING V. LOCK TIMER SEARCH DISPLAY LOCK CNT RESET MENU TIME MODE - SET FIELD REV FIELD ADV - + - + + [TIME MODE +/-] buttons Connection Connect the input and output connectors on the rear panel correctly. Refer to "CONNECTIONS" on pages 14 to 16. Menu switch settings Set menu switches as required. 5 INPUT • Select LINE (composite) or Y/C video signal input. • REPEAT REC Set to "ON" to perform repeat recording. For details, refer to "6-7 Repeat Recording" on page 43. • AUTO REC CHECK Set to "ON" to perform Recording Check automatically at the beginning of a tape in the Repeat Recording mode. 5 SRI/EXT MODE • SRI/EXT REC - Set to "SERIES" to perform series recording. For details, refer to "6-6 Series Recording" on page 41. - Set to "EXT" to execute automatic recording when activated by an external signal. For details, refer to "6-8 Recording with External VCR Activation Signal" on page 44. 5 ON SCREEN/F. DISPLAY MODE • Select the brightness and ON/OFF for each indication (date, time and recording speed, etc). During recording, the selected on-screen data is recorded together with video signals. If you do not want to display or record a specific item, set it to "OFF". • setting Set whether or not the [REC] indicator lights in the Record mode. 5 ALARM/SENSOR MODE • REC MODE - For alarm recording, set to "ALARM" or "ALL". For details, refer to 6-4 Alarm Recording" on page 38. - For sensor recording, set to "SENSOR" or "ALL". For details, refer to 6-5 Sensor Recording" on page 40. 5 VTR MODE • HDR Set to "ON" to record in the High-Density Recording mode during timelapse recording. • POWER ON REC Set to "ON" for external timer recording or automatic restart of recording after a power failure. For details, refer to "6-9 How to Restore Recording After Power Failure" and "6-10 External Timer Recording" on page 45. • AUTO REW Select the mode engaged when the tape ends. "OFF": The Stop mode is engaged. "ON": The tape automatically rewinds to the beginning. When the menu switch is set to "ON", repeat recording takes place regardless of the setting of this switch. 5 BUZZER • TAPE END Set to "ON" if you want the buzzer to sound when the tape ends during recording. 5 IN/OUT • CAMERA SW Set the camera switching timing signal output to an external sequential switcher during recording. - To switch cameras every 1 field or 1 frame, set this menu switch to "1 FIELD" or "2 FIELD". Recording tape Use an HG (high grade) tape for recording with this unit (a JVC cassette is recommended). Before recording, perform a test recording to check the picture quality. Tapes recorded on this VCR cannot be played back on normal VHS VCRs. To avoid inadvertently trying to play back tapes recorded in this unit on standard VHS VCRs, label the cassette appropriately to distinguish it from tapes recorded in the normal VHS mode. 29