JVC SR-9090U SR-9090U Timelapse Recorder Instruction Manual (1137KB) - Page 51
JVC SR-9090U - High Resolution 960 Hour Density Manual
View all JVC SR-9090U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
8 TROUBLESHOOTING 8-2 No Error Indication Symptoms No power is supplied. Causes q Is the power cord disconnected? q Is the [TIMER] indication shown? q Is the Operation Lock mode engaged? Is the Operation Lock mode engaged? q Is the monitor connected correctly? q Is the [TIMER] indication lit? This is not a malfunction. - Is the tracking adjusted properly? Dust may have accumulated on the video heads. Adjust the tracking with the [TRACKNG +/-] button. Clean the heads with a commerciallyavailable head cleaning tape. If the picture quality is still unsatisfactory, consult your local JVC dealer. Use a tape on which sound is recorded. Remedies q Connect the power cord to an AC outlet. q Press the [TIMER] button so that the [TIMER] indication goes out. q Release the Operation Lock mode. Release the Operation Lock mode. q Connect the monitor correctly. q Press the [TIMER] button to clear the [TIMER] indication. Operation buttons have no effect during recording and playback. No picture is shown during playback. Noise appears in the picture in the Shuttle Search mode, Still mode and Field Advance mode. Noise appears in part of the playback picture. When the cassette is played back, the picture becomes rough or disappears. No sound is heard during playback. q Are you recording in a timelapse mode? If so, sound is not recorded. q During alarm scan, no sound is output. Has the cassette safety tab been removed? q Is the clock set correctly? Is the timer properly programmed? q Is the [TIMER] indication lit? Is the [TIMER] indication lit? During recording and playback, the VCR's motor and rotary heads are running. The sound this generates is normal and not a malfunction. q Is the clock set? q Is the menu switch set to "OFF"? Is the menu switch in set to "STOP"? Is the menu switch in set to "OFF"? Is the menu switch in the menu set to "ON"? Recording is impossible. Timer recording is not working. Paste a piece of cellophane tape over the hole. q Check again. q Check it again. Press the [TIMER] button so that the [TIMER] indication goes out. If you feel it is too noisy, install the VCR in a rack. The clock cannot be set. Tape running sound is heard in the Record, Play, FF and REW modes. The time/date is not shown. Auto REW and repeat recording are not possible during recording. Camera image is not switched. q Set the clock. q Set the menu switch to "ON". Set the menu switch to "OFF". When setting the camera switching timing on this unit, set the menu switch to "1 FIELD" or "2 FIELD". To perform repeat recording using external recording activation, set to "OFF" and to "ON". External recording is not possible. 54