JVC TK-C8301RU Instruction Manual - Page 18

KE-18, Connection Continued

Get JVC TK-C8301RU PDF manuals and user guides View all JVC TK-C8301RU manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Connection/Installation Connection (Continued) Memo v If thin cables are used, the resistance of the cables will be high and a significant voltage drop will occur when the camera is at its maximum power consumption. Either use a thick cable with low resistance or place the power supply near to the camera and shorten the length of the cable to restrict the voltage drop at the rated current of camera to below 10 %. If voltage drop occurs during operation, the performance will be unstable. v Do not connect an AC 24 V cable to a commercial power supply. If it is connected by mistake, the internal circuit may be damaged. Sent the camera to the nearest JVC service center for inspection as the internal circuit may be damaged. v Do not connect DC 12 V and AC 24 V cables at the same time. v When using a DC 12 V power supply, ensure that the polarities of the cable are correct. Connecting the Monitor Connect with a 75 K coaxial cable (BNC) such as RG-59 or equivalent. E-18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Connection (Continued)
Memo
v
If thin cables are used, the resistance of the cables will be
high and a significant voltage drop will occur when the
camera is at its maximum power consumption. Either use a
thick cable with low resistance or place the power supply
near to the camera and shorten the length of the cable to
restrict the voltage drop at the rated current of camera to
below 10 %. If voltage drop occurs during operation, the
performance will be unstable.
v
Do not connect an AC 24 V cable to a commercial power
supply. If it is connected by mistake, the internal circuit may
be damaged. Sent the camera to the nearest JVC service
center for inspection as the internal circuit may be damaged.
v
Do not connect DC 12 V and AC 24 V cables at the same
time.
v
When using a DC 12 V power supply, ensure that the
polarities of the cable are correct.
Connecting the Monitor
Connect with a 75
K
coaxial cable (BNC) such as RG-59 or equivalent.
Connection/Installation
E-18