JVC TK-C8301RU Instruction Manual - Page 34
ADVANCED MENU Continued, When the D/N MODE is set to AUTO, setting the B&W Av:Pk
View all JVC TK-C8301RU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Menu Setting ADVANCED MENU (Continued) B&W Av:Pk Sets the exposure detection method for the black-and-white mode to the ratio of the AVERAGE value and PEAK value. When the screen, other than the highlighted section, becomes dark, increase the AVERAGE value (ex. 10:0). When the highlighted section becomes dark, increase the PEAK value (ex. 5:5). [Setting values : 10:0, 9:1, 8:2, 7:3, 6:4, 5:5] (Default value: 8:2) Memo When the D/N MODE is set to "AUTO", setting the B&W Av:Pk to the low value (ex. 5:5) may cause hunting. Setting should be done upon checking the actual images. ALC PRIORITY Sets whether to prioritize motion or picture quality when the subject becomes dark. [Setting values : MOTION, COMBO, PICTURE] (Default value: MOTION) MOTION : Prioritizes motion. AGC (Automatic Gain Control) operates with priority. COMBO : Adjusts motion and picture quality equally. PICTURE : Prioritizes picture quality. SENSE UP (Electronic Sense Up) operates with priority. Memo When [AGC] or [SENSE UP] is set to "OFF", "ALC PRIORITY" does not work even if it is set. SHUTTER SPEED Sets the speed of the electronic shutter. The higher the shutter speed, the smear phenomenon due to the characteristic of the CCD where white, vertical stripes appear around a bright light source will be emphasized. [Setting values : 1/60 (U model), 1/50 (E model), 1/100 (U model), 1/120 (E model), 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000] (Default value: 1/60 (U model), 1/50 (E model)) Memo v [SHUTTER SPEED] cannot be set in the following cases: - when the [WIDE-D LEVEL] is set to "ON" - when [SENSE UP] is set to "OFF" E-34