JVC TK-C8301RU Instruction Manual - Page 21
Fall Prevention, Connection/Installation, M3 x 6 mm
![]() |
View all JVC TK-C8301RU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Connection/Installation m Fall Prevention v Special attention is required when installing the camera to the wall or ceiling. You should not engage in the installation work yourself. Ask a professional to do the job. Otherwise, injuries or accidents may occur if the camera falls. v When installing the camera on a fixer, pan/tilt unit and the like, make sure to install it firmly using a rotation-preventive hole to prevent fall. v To prevent fall, connect the camera to a section with sufficient strength (ceiling slab or channel) using a fall prevention wire. v Pay attention to the length, strength, routing and material (insulation properties) of the fall prevention wire used. v Use the screw (M3 x 6 mm) on the back of the camera for the installation of the fall prevention wire. Do not use a screw that is longer than 6 mm as it may damage the internal parts. 6mm6 mm 2 mm OFF D/N AUTO ON BLC OFF CRT LCD ON WIDE-D OFF MONITOR TYPE CLASS(U2TOYNPLEY) ISOONLALYTE(ED TPYOPWEE) R AUX GND SEE INSTRUCTMIOANNUAL VIDEO OUT FOCUS ADJUST SET MENU DC12V 2 AC24V 1 Fall prevention wire M3 x 6 mm . Note When mounting the camera to the ceiling, ensure to wear safety glasses to protect the eye from any falling objects. E-21
![](/manual_guide/products/jvc-tkc8301ru-instruction-manual-f1dbf75/21.png)