JVC TK-C8301RU Instruction Manual - Page 9
For USA and Europe, Code, ANSI/NFPA 70.
![]() |
View all JVC TK-C8301RU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Introduction (For USA and Europe) v The unit is to be powered by a DC 12 V or an AC 24 V power supply. v The unit is to be powered by a UL Listed DC 12 V or an AC 24 V power supply. (For USA) v The AC 24 V and 12 V DC power supply shall conform to the following: Class 2 only (For USA), Isolated power supply only (For Europe). v This installation should be made by a qualified service person and should conform to all local codes. v This installation shall be in accordance with the National Electrical Code, ANSI/NFPA 70. v Any Mention in this manual of Alarm inputs have not been evaluated by UL to be used for Burglar Alarm Functionality. v Special technique is required when installing this product. Please refer to your dealer for installation. v Rating label is pasted on of the camera unit. v JVC KENWOOD Corporation is not liable for any compensation if you drop the camera due to insecure mounting by not following the installation description. Pay careful attention during installation. v When mounting this product to a ceiling or wall, select a location strong enough to support the weight of this camera. If the location is not strong enough to support the weight, be sure to reinforce the ceiling or wall before installation. v The camera may drop if the mounting screws are not tightened securely. Check that the screws are tightened appropriately and securely. v Do not install the camera near lighting fixtures of high temperature, such as spot lights. It might result in failure or fires. v Do not step on or hang on the camera. Doing so may cause the camera to fall, and break, which would cause injuries. E-9
![](/manual_guide/products/jvc-tkc8301ru-instruction-manual-f1dbf75/9.png)