JVC TM-2000SU TM-1600SU, TM-2000SU monitor instruction manual (318KB) - Page 10
How To Initialize The, Setting
View all JVC TM-2000SU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
HOW TO INITIALIZE THE SETTING SCREEN DISPLAY AND SELECTIONS IN THE RESET MODE You can set and screen items, picture adjustment items and the volume level to their factory-set (initial) values. 1. Press the Power ( ) Switch to turn the power OFF (-). RESET screen RESET Are you sure ? "Yes" then "No" then or ON OFF POWER 2. While pressing both MENU button and PHASE ( ) buttons, press the Power ( ) switch to turn the power ON (_). The RESET screen is displayed. PHASE MENU ON OFF POWER Note: ● The RESET screen will not be displayed if the MENU or PHASE buttons are pressed for a very short time. Keep pressing them until the display screen appears. 3. Setting ⅷ Initialization is required. CONTRAST Press the CONTRAST ( ) button. * When initialization is completed, and the RESET screen disappears. ⅷ Initialization is not required. - + VOLUME/SELECT Press the VOLUME/SELECT [+] or [-] button. * Initialization is aborted, and the RESET screen disappears. Initial settings Functions (Items) Initialization (setting) SHARPNESS 00 COLOR TEMP. 6500 COLOR SYSTEM AUTO ASPECT RATIO 4-3 BRIGHTNESS P.S. OFF H. POSITION 00 V. POSITION 00 WHITE BALANCE R. CUT OFF 00 G. CUT OFF 00 B. CUT OFF 00 R. DRIVE 00 G. DRIVE 00 B. DRIVE 00 CONTROL LOCK OFF B.P.S. LEVEL 10 REMOTE SELECT 00 PHASE 00 CHROMA 00 CONTRAST 00 BRIGHT 00 VOLUME 20 Volume Picture adjustment screen screen Sorts 10